Electronics Engineers 채용정보

  • 전자 공학
제안:
더 보기

국가

특정 위치

시험

시급 (USD)

평점

온라인

  • ahmedmohamed85님 고용
    6.9
    152개 리뷰 시간당 $50 USD
    10 year's experience in digital system design using VHDL and verilog for FPGA's and CPLD's both for Xilinx and Altera Chips. I also have 10 years experience in working with Xilinx Ise form version 6.2 to 14.7 and Altera Quarus 2 for VHDL , verilog, system verilog and ip in addition to experience in Vivado design tool,...
    10 year's experience in digital system design using VHDL and verilog for FPGA's and CPLD's both for Xilinx and Altera Chips. I also have 10 years experience in working with Xilinx Ise form version 6.2 to 14.7 and Altera Quarus 2 for VHDL , verilog, system verilog and ip in addition to experience in Vivado design tool, and HLS and digital design using zynq7000 덜 보기
  • MUhammadt429i님 고용
    5.2
    18개 리뷰 시간당 $10 USD
    Senior Embedded Systems Engineer (HW/SW Design) -Embedded C programming. -RISC assembly programming and optimization. -Bare-metal, BSP and RTOS Application Development (uC/OS III , FreeRTOS). -Developed on 8-bit PIC series of Micro-Chip (PIC16 , PIC18 , PIC24), 8-bit AVR of Atmel (ATmega , ATtiny),16-bit MSP of Texas...
    Senior Embedded Systems Engineer (HW/SW Design) -Embedded C programming. -RISC assembly programming and optimization. -Bare-metal, BSP and RTOS Application Development (uC/OS III , FreeRTOS). -Developed on 8-bit PIC series of Micro-Chip (PIC16 , PIC18 , PIC24), 8-bit AVR of Atmel (ATmega , ATtiny),16-bit MSP of Texas Instruments (MSP430), 32-bit ARM-based microcontrollers of NXP (LPC), and 32-bit ARM-based microcontrollers of ST (STM32F). -Developed using using MPLAB X IDE , Atmel Studio , Code Composer Studio and uVision KEIL IDE. - FPGA digital design, writing VHDL test benches and working with simulators such as ModelSim. -Designing and implementing SOPC systems (Intel FPGAs and NIOS II soft processor) using Quartus II and Nios II Software Build Tools . -Building SOC systems (Xilinx Zynq series) using the Vivado IDE and Xilinx SDK. -High-Speed PCB routing with Altium Designer and Eagle Professional. 덜 보기
  • sukhoi1님 고용
    6.5
    49개 리뷰 시간당 $40 USD
    I am a Senior Embedded and Automation engineer. I have a long background in these fields plus 10 years' experience in embedded system and more than 5 years in automation engineering. I have worked in OLIMEX (www olimex com) as a hardware designer for a few years. I have designed more than 300 products which...
    I am a Senior Embedded and Automation engineer. I have a long background in these fields plus 10 years' experience in embedded system and more than 5 years in automation engineering. I have worked in OLIMEX (www olimex com) as a hardware designer for a few years. I have designed more than 300 products which found a good market around the world. I have a very good knowledge in circuit design and step by step processing for manufacturing and mass production. My team is one of the first teams who has done many projects with ESP32. We have done 2 projects as well with complex A20 Linux custom boards successfully. Skills: Professional in Eagle CAD IoT, esp32 Wroom, esp8266, A20, A13, ?10, pic32, pic18, FPGA, Https servers, Embedded Web servers, cpu1200 Epaper displays. - Siemens automation - PLC (cpu315, cpu 1200) and HMI (Comfort Panels) - Lenze automation - PLC (controller 3200C) and HMI(p300) 덜 보기
  • EngMohamedOsman님 고용
    3.3
    5개 리뷰 시간당 $20 USD
    Developing innovative products demands the contribution of a top-notch mechanical engineering design corporate. We can help you leverage precision engineering and cost-effectively take products from conceptualization through production. Our knowledgeable engineering professionals design and draw from their substantial...
    Developing innovative products demands the contribution of a top-notch mechanical engineering design corporate. We can help you leverage precision engineering and cost-effectively take products from conceptualization through production. Our knowledgeable engineering professionals design and draw from their substantial experience, and utilize the industry’s top engineering tools, and aesthetics. Manufacturing the best products also demands effective production planning, fabrication, and assembly. ACME Corporate provides all of these services, including documentation and bill of materials (BOM) production, tool and manufacturing sourcing, design and manufacturability (DFM) and sustainability assessments. Your products will be engineered to comply with all applicable industry standards and regulations by validating mechanical designs, optimizing design performance, and prototyping critical components. 덜 보기
  • rojuwon1222님 고용
    6.5
    36개 리뷰 시간당 $35 USD
    Thank you for reading the overview. I have 13+ years experience in circuit & PCB design, manufacture & assemble, embedded firmware & application, Mobile Apps development. I have developed many products ago using various microcontroller including STM32 serial, ESP32, Arduino, Raspberry Pi, Atmel, CPLD, FPGA, DSP,...
    Thank you for reading the overview. I have 13+ years experience in circuit & PCB design, manufacture & assemble, embedded firmware & application, Mobile Apps development. I have developed many products ago using various microcontroller including STM32 serial, ESP32, Arduino, Raspberry Pi, Atmel, CPLD, FPGA, DSP, ARM, ADuC, USB controller etc. Also, I am experienced in working with communication devices like GPS, WIFI, Bluetooth, LORA, Zigbee, GSM with MobileApps. - Product Design - Electronic Engineering - Digital & Analog Circuit Design, - PCB Design & Layout, Manufacture, Artwork - Microcontroller, Arduino, STM32, Raspberry PI, Wireless, GPS - Altium Designer I will exceed Customer Expectations with my Superior Products and Services. 덜 보기
  • levstremetskyi80님 고용
    6.2
    27개 리뷰 시간당 $35 USD
    ⭐ ⭐ ⭐ ⭐ ⭐ I am a senior embedded system engineer and I have a good experience in pcb design and firmware programming. I have been working in this field for 8+ years. ✔️ My top skill is here : ✔ PCB design ✔ Product 3d design ✔ Manufacturing ✔ Firmware programming ✔ Android and iOS App development ✔ ...
    ⭐ ⭐ ⭐ ⭐ ⭐ I am a senior embedded system engineer and I have a good experience in pcb design and firmware programming. I have been working in this field for 8+ years. ✔️ My top skill is here : ✔ PCB design ✔ Product 3d design ✔ Manufacturing ✔ Firmware programming ✔ Android and iOS App development ✔ MATLAB/LabView ✔️ My experienced field: ✦ Altium Designer, Cadsoft Eagle, Cadence Allegro, OrCAD, Arduino, Keil vision, MATLAB, Quartus II, Xilinx ISE/Vivado, CCS ✦ ARM cortex M, A, H serious (stm32f, allwinner, freescale imx, qualcomm snapdragon, ...) ✦ Texas Instrument DPS (tms320c2000, c5000, c6000, msp430, cc1310, etc) ✦ Atmega and dsPIC, etc ✦ FPGA (altera, xilinx, lattice, actel) ✦ IoT (Bluetooth Low Engergy (BLE), WiFi, LoRa, RFID, Wireless, GSM, GPS, ... ... ) ✔️ Interesting area : Military/Industrial/Medical wearable device development I believe to assist you in pcb design, firmware programming, product 3d design and manufacturing. Thanks 덜 보기
  • aliserbetci님 고용
    6.5
    28개 리뷰 시간당 $17 USD
    I am electronics and communication engineer.I have been working more than 6 years about embedded systems. Very good experienced about embedded systems PCB design, embedded C/C++ and RF systems. I have lived abroad and spoken english more than 10 years. I am good at translation english to turkish (especially...
    I am electronics and communication engineer.I have been working more than 6 years about embedded systems. Very good experienced about embedded systems PCB design, embedded C/C++ and RF systems. I have lived abroad and spoken english more than 10 years. I am good at translation english to turkish (especially technical translation about engineering). 덜 보기
  • amelectronics님 고용
    6.1
    24개 리뷰 시간당 $15 USD
    My name is JAMAL and I have expertise in following fields of technology. (Apart from my experience, I will get idea from you and will deliver the complete working project) a. Experienced in microcontroller programming; 1. AVR (8- Bit, 32-Bit) 2. PIC (PIC16, PIC18, PIC24) 3. 8051 (Atmel, Intel, Nuvoton) 4....
    My name is JAMAL and I have expertise in following fields of technology. (Apart from my experience, I will get idea from you and will deliver the complete working project) a. Experienced in microcontroller programming; 1. AVR (8- Bit, 32-Bit) 2. PIC (PIC16, PIC18, PIC24) 3. 8051 (Atmel, Intel, Nuvoton) 4. STM (STM8F and STM32F) 5. Nordic (nRF51, nRF52) 6. Cypress BLE PSoCs 7. Dialog's DA1458x b. Experienced in Electronics development boards; 1. Arduino 2. STM32 Discovery 3. All kind of BLE SoCs c. Experience in electronic modules; 1. RFID and Fingerprint Modules 2. RF Tranceivers(Silicon Labs chips, Zigbee, Wifi and Nordic etc) 3. Camera Modules (Omnivision) 4. SD card and memory chips 5. All type of displays ie LCD, GLCD, TFT, LED, OLED etc d. Experience in Pro Computer Software 1. Keil 2. AVR Studio, MPLAB, STVD 3. KiCAD, Altium, Eagle 4. Cypress PSoC Creator I can also develop android apps and IoT projects with online database management. :-) 덜 보기
  • microembedded님 고용
    6.2
    24개 리뷰 시간당 $25 USD
    I am well qualified Electrical Engineer. I have a strong skill set and foundation in Arduino as I have been working with these for many years. I also have strong skills in Circuit Design and Digital Design having worked in these areas. I have sound experience with Electrical Engineering. If hired by you I will...
    I am well qualified Electrical Engineer. I have a strong skill set and foundation in Arduino as I have been working with these for many years. I also have strong skills in Circuit Design and Digital Design having worked in these areas. I have sound experience with Electrical Engineering. If hired by you I will put in my best effort and deliver high quality work. I am ready to be hired by you. 덜 보기
  • AlexandrSmirnoff님 고용
    5.7
    3개 리뷰 시간당 $10 USD
    Hello. I have been working as hardware engineer for 10 years. Work in automotive, aviation and aerospace fields. Now I decide to become freelancer. Key specifications: • Results-oriented professional with 10 years experience in hardware engineering; • Solid knowledge of circuit design; • Comprehensive knowledge on...
    Hello. I have been working as hardware engineer for 10 years. Work in automotive, aviation and aerospace fields. Now I decide to become freelancer. Key specifications: • Results-oriented professional with 10 years experience in hardware engineering; • Solid knowledge of circuit design; • Comprehensive knowledge on the PCB layout, debugging tools and software, oscilloscope, logic analyzer; • Self-motivated and enthusiastic on working in fast-paced environment; • Quick learning and outstanding problem-solving capabilitiesand strong debugging skills; • Excellent working quality and productivity; Technical skills: Languages: VHDL, Assembler, C; Software: Altium Designer, Quartus II, PCAD, OrCAD, Mentor Graphics, SolidWorks, AVR Studio, MathCad, MS Office, Adobe Photoshop, Adobe Premiere; Hardware: IBM PC, Oscilloscope and Digital analyzer, electrical multimeters; Other: Good soldering skills. 덜 보기

님, 다음 프리랜서는 현재 오프라인 상태에 있습니다.

님, 다음 프리랜서는 현재 오프라인 상태에 있지만, "" 분야와 일치합니다.