Industrial design일자리

필터

내 최근 검색 기록
필터링 기준:
예산
최대
최대
최대
유형
보유 기술
언어
    프로젝트 진행 단계
    21,272 industrial design 건의 일자리 확인, 급여 기준: USD

    We're looking for a product designer to design a aesthetic device. I will provide "old" design ( we have the product and we need to create a new design for plastic enclosure) and also some images with products we like. I need 2 quote: 1 - for 3d model - images for presentation 2 - industrial design files for manufacturing - we will use vacuum forming This is the product: And I attached one product concept we like.

    $338 (Avg Bid)
    파워형 상금 보장형
    $338
    2 건의 응모작

    4 story new build glass and steel industrial building

    $2417 (Avg Bid)
    $2417 (평균 입찰가)
    28 건의 입찰

    We are searching mechanical engineers with experience in IoT and electronic device enclosure with an high IP grade protection. We need to cover the concept design, the prototype design and eventually (but not mandatory) the industrialization design for industrial moldering.

    $16 / hr (Avg Bid)
    $16 / hr (평균 입찰가)
    28 건의 입찰

    Only for freelancers based in Singapore only as you are required to physically present. I am looking for a product/industrial designer to finetune the workings of a children's toy. The person will have be well versed in electronical components such as circuitry, LED lights and power generators. Price is negotiable.

    $744 (Avg Bid)
    지역별
    $744 (평균 입찰가)
    3 건의 입찰
    GIALLOUROS.COM 5 일 left

    INDUSTRIAL CONSUMABLES FASTENER B2B PORTAL

    $28 / hr (Avg Bid)
    $28 / hr (평균 입찰가)
    29 건의 입찰
    Content writer 5 일 left

    Content writer needed for an industrial project.

    $327 (Avg Bid)
    $327 (평균 입찰가)
    59 건의 입찰

    Hi colorgraphicz, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $7 / hr (Avg Bid)
    $7 / hr (평균 입찰가)
    1 건의 입찰

    Cooling performance analysis of lattice and solid gas turbine blades. For temperature and other boundary condition, use any values available for industrial gas turbines.

    $86 (Avg Bid)
    $86 (평균 입찰가)
    11 건의 입찰

    Need engineer for immediate start on sensor board design with RS485 output. Board schematics have been partially completed. Send message for more information Job is super urgent Must have ability to test prototype boards Successful applicant will be hired long term

    $22 / hr (Avg Bid)
    $22 / hr (평균 입찰가)
    37 건의 입찰

    I'm an App developer for Apple. sells Apps through Apple App Store . I need a freelancer to fill me > valid Business License for Individual Industrial and Commercial Households [个体工商户营业执照 and get me the approval . it is Apple APPS Industry for Individual (Individual App Developer) "Individual advertisers that are not business organizations must provide a valid Business License for Individual Industrial and Commercial Households [个体工商户营业执照]. This document should be uploaded as an “entity document.”

    $250 (Avg Bid)
    $250 (평균 입찰가)
    1 건의 입찰

    Want to hire 2 Plc Programmers at Gujarat location Need Mitsubishi PLC Programmer on contract basis for 12 months Candidates should have hands on experience on FX,Q & R CPU and projects like conveyors, motors & VFD, Robotic interfering etc. 1-3 years of experience in industrial automation industry is must, and should have Own laptop to work on site Company will provide accommodation and food

    $356 (Avg Bid)
    $356 (평균 입찰가)
    3 건의 입찰

    Need a reliability engineer to look at some issues in an industrial company.

    $139 (Avg Bid)
    $139 (평균 입찰가)
    5 건의 입찰

    Artistic design of different projects: 1. Teachers residential quarters with one apartment block and 4 bungalows 2. Water pumping station for a community of 5,000 residence 3. An NGO secretariat complex with event center and multiple meeting rooms. 4. A School building for laboratory. library and staff rooms. 5. An Industrial complex for Sawmills, Furniture shops, Fish ponds and building materials.

    $346 (Avg Bid)
    $346 (평균 입찰가)
    29 건의 입찰

    need a freelance sales person to close deals on commission bases for cnc machining,industrial automation tool making service company in uae

    $22 (Avg Bid)
    $22 (평균 입찰가)
    10 건의 입찰

    Busco estudiante Colombiano de ingenieria Industrial de ultimos semestres con el fin de hacer una entrevista a a un estudiante de primeros semestres para constatar su habilidad

    $19 (Avg Bid)
    $19 (평균 입찰가)
    3 건의 입찰

    Los asesores de ventas independientes podrán ganar comisiones del 50% después de gastos en los negocios cerrados con ASH Ingeniería. Su principal función es cerrar negocios con los productos y servicios ofrecidos por la compañía en los sectores industrial, comercial, doméstico y acueductos. ASH Ingeniería suministra asistencia administrativa y comercial de apoyo a los asesores. No se requiere una profesión específica, se recomienda que los asesores cuenten con experiencia previa en áreas asociadas a la gestión del agua, en especial, áreas ambientales, sanitarias e hidráulicas. El salario es del 50% de la utilidad de los negocios cerrados es decir cancelados 100% a ASH , cada asesor deb...

    $1120 (Avg Bid)
    $1120 (평균 입찰가)
    2 건의 입찰
    Trophy icon Neil Stafford Concreting 9 일 left

    Looking for a high qauility logo for a Concrete Business. Must be Industrial and Masculine Easy to read. Neil Stafford Concreting is the logo name. Can be abbreviated and also must include the actual name if so.

    $71 (Avg Bid)
    파워형 상금 보장형
    $71
    383 건의 응모작

    QUIERO HACER UNA TESIS PARA MAESTRIA EN RIESGO LABORALES PARA UNA UNIR QUE ES UNA UNIVERSIDAD EN LINEA. ES SOBRE ENFOQUE DE HIGIENE INDUSTRIAL

    $181 (Avg Bid)
    $181 (평균 입찰가)
    24 건의 입찰
    Build a Logo 2 일 left

    We need a new logo for our company. our name is VT100 SRL but logo could be simple VT100. we attacch actual logo and one ideas of logo (Cisco systems 2013 logos) that we like. we prefear color red or blue but we're open to new proposal. Our company develop and product electronic systems for industrial and medical plant.

    $68 (Avg Bid)
    $68 (평균 입찰가)
    105 건의 입찰

    Build me digital marketing material like flyers, Social media material For our diverse industrial / domestic product range for having insta, WhatsApp & fb marketing.

    $81 (Avg Bid)
    $81 (평균 입찰가)
    12 건의 입찰

    Need a neat and minimalistic catalog for Industrial valves and pipe fittings. The design doesn't need to be over the top, basic clean graphics and easy readability

    $65 (Avg Bid)
    $65 (평균 입찰가)
    32 건의 입찰

    We need to be in TOP 5 ranking, first page for GOOGLE Singapore for a Wordpress website. - Off site Links (500 per month) - 20 keywords; Requirements - - Minimum 4 articles for each website. - Website analysis & On Page SEO - On Page SEO Report + Weekly & Keyword Ranking reports - Must have articles available to post. - Breakdown of cost (Hidden cost will be reported) - Must achieve top ranking (within first page) in white SEO techniques. BUDGET FOR THE WEBSITES: SGD$25 to SGD$45 MAX. DON'T OVERBID!!! PLEASE NOTE: USE SINGAPORE DOLLAR.

    $67 (Avg Bid)
    $67 (평균 입찰가)
    16 건의 입찰
    Trademark Research 1 일 left
    확인

    We manufacture industrial safety gloves and there are several names I'm interested in using and trademarking if possible. The product are knitted gloves uses special Polyethyelene yarns to make cut resistant gloves... Can we use / trademark the following: Silk-Like Steel NEXGEN CUT RESISTANCE TLT ( this stands for Thinner Lighter Tougher) Next Generation Cut Resistance Can these be trademarked - if so how much to TM in USA?

    $43 (Avg Bid)
    $43 (평균 입찰가)
    16 건의 입찰

    I am looking to get a LOGO developed for a new company offering Design Services. WE provide full industrial design and drafting services to our clients in the instrumentation and electrical disciplines. We can provide full support for AutoCAD, Microstation, and BIM (Building Information Modeling).

    $92 (Avg Bid)
    파워형
    $92 (평균 입찰가)
    93 건의 입찰

    build an ecommerce website that is mobile friendly for dropshipping industrial masks and gloves with multiple sellers

    $254 (Avg Bid)
    $254 (평균 입찰가)
    104 건의 입찰

    Looking for coding, mathematical modelling experts for writing several manuscripts in the field of industrial safety, accident data analysis, text mining and NLP tasks. You should have good experience in this domain and at least have published 3 journal articles earlier. The targeted journals are high quality like the Q1 category of Elsevier, IEEE journals. You have to come up with ideas, collect data if required, write a complete manuscript, do coding, editing and all tasks related to an academic paper. Please feel free to contact me before committing anything. Share your Google scholar or ORCID profile for a quick review of your profile and quick hiring. The approx budget is 700- 1200 USD based on the idea and journal quality.

    $702 (Avg Bid)
    $702 (평균 입찰가)
    5 건의 입찰

    Searching for an Industrial designer / Product designer who can design a great product that would be realistic, the product should have management-related outcomes. Interested people message me for further details of the project. The timeline for the project is 4 days.

    $31 (Avg Bid)
    $31 (평균 입찰가)
    12 건의 입찰

    ...completed in the next 12 months or so , We will hope to work with the same team for all our future small projects. We require the Logo Design for Bay Towing services ASAP ( Next 24 Hours if Possible ) - All the other tasks need to be completed by Thursday the 20th Feb 2022. One Logo/ Business card for " Bay Towing Services" Notes- This Logo/Business card will be use /have a family friendly feel/look. It will use pink for the main the main color & Id like to use the Breast cancer awareness logo as Part of its background design. & One Logo/ Business card for "Beresfield Towing & Transport" Note : This company will be tailoring to the heavy industrial market- Must be a BOLD logo / Business card - The logo will be made up using B...

    $271 (Avg Bid)
    $271 (평균 입찰가)
    53 건의 입찰
    Industrial Designer 7 시간 left
    확인

    Looking for an industrial designer to design a new external frame backpack. Please let us know if you have similar experience with these types of industrial designs.

    $25789 (Avg Bid)
    $25789 (평균 입찰가)
    15 건의 입찰

    I need specifications and design for immersion cooling system for bitcoin mining. Please bid only if you have good experience in electrical and thermal engineering, industrial immersion cooling systems or similar crypto mining systems similar to the below list. Please consider the below while bidding for the project: - We need the consultant to discuss and provide detailed consultation for the specification - We need engineering drawings and specification for manufacturing - We own full and exclusive IP rights on all specs, design, and documentations - Upon successful design, we will need support during manufacturing and upgradation (We will pay separately for such projects.) Please find reference companies below who are doing the same. - DCX ...

    $26 / hr (Avg Bid)
    $26 / hr (평균 입찰가)
    18 건의 입찰

    We are a solvent family-owned business in the field of industrial engineering. Financial health is a big challenge for us at the moment and we want to hire a financial expert for advice to overcome the challenges.

    $2590 (Avg Bid)
    $2590 (평균 입찰가)
    18 건의 입찰
    control system 종료 left

    3.1 Industrial process control involves monitoring and controlling machinery, systems, and processes to achieve a production level that consistent, economic, and safe. Process controls are widely applied especially in chemicals, pharmaceutical, biotechnology, energy, water/wastewater, oil & gas, paper and food & beverages industries where the aforementioned objectives are difficult to be achieved purely by human manual control. Figure 3.1 shows a general closed-loop feedback control block diagram for a process control system. As can be seen from the figure, a typical process control system consists of a controller, a final control element/actuator, a plant/process and measurement sensors/transmitters. Conduct a literature review about industrial process control and di...

    $25 (Avg Bid)
    $25 (평균 입찰가)
    6 건의 입찰

    Requerimos una persona con estudios de ingenieria industrial o similar para seguimiento de proyectos y apoyo del área comercial, el trabajo es 100% home office, no requerimos un horarios específico. Indispensable dominio del español y preferentemente que viva en México. Deseable experiencia en equipos de refrigeración comercial y como asistente virtual Muy organizada, automotivada y responsable.

    $10 / hr (Avg Bid)
    $10 / hr (평균 입찰가)
    32 건의 입찰

    We require a custom dashboard to monitor an industrial machine. The dashboard must contain embedded Grafana panels and also display a set of predefined images which change depending on machine state (state to be queried from Graphite server) as well as a video player which shows an RTSP stream of the machine to be monitored. The Graphite, Grafana and RTSP servers will be provided and the focus of this project is to develop the front-end (HMTL/CSS/JS) for the custom dashboard. Initial prototype of the dashboard should be React based and security/auth for Grafana embedding, machine state polling and video streams to be kept in mind but not strictly required for the prototype.

    $856 (Avg Bid)
    $856 (평균 입찰가)
    17 건의 입찰

    Hope to find an experienced disigner to create a concept and design of a corporate brochure for an industrial company (heavy machinery and power plant equipment). It's a small service company, so the budget is not huge at all. Please send me your portfolio if you are interested in this subject. Details in direct messaging.

    $291 (Avg Bid)
    $291 (평균 입찰가)
    78 건의 입찰

    ** Skills Required - Knowledge of communication networking protocols like TCP and Eathernet - Languages like C , C#, and Python. - Should know how to carry out end to end IoT/IP systems that include connectivity, device, cloud, backend, applications, and analytics. - Experienced in working on wireless protocols like Wifi and Bluetooth - Experienced in acquiring field data through industrial gateway devices - Experienced in databases like Ms SQL. - Ability to Identify bottlenecks and bugs, and devise solutions to these problems - Experienced in dealing with Restful APIs **What's Required - Creating and developing devices, sensors and software - Designing, coding and testing features of IoT devices - Providing solutions to issues related to the connection of networks and platfor...

    $592 (Avg Bid)
    NDA (비밀 유지 계약서)
    $592 (평균 입찰가)
    21 건의 입찰

    I need an Architect from China for setup a renovation project for an old industrial area of 8'000 mq. The architect selected must design the project, identify the building companies from china and supplier of materials from china and follow the project end to end. Here attached the map of the building in scope

    $8667 (Avg Bid)
    지역별
    $8667 (평균 입찰가)
    8 건의 입찰
    logo A.i create 종료 left

    I need a logo for a business of wooden industrial furniture manufacturer. I have an idea of the color from the website example. the logo will have some types of files like AI, Corel, Jpeg, png

    $23 (Avg Bid)
    $23 (평균 입찰가)
    108 건의 입찰

    We are looking for a designer, to do the general user interface design for our software applications. Ususally its a HMI for industrial machines. Based on our scetches and reference images you should be able to create a modern looking user interface. The design should be done in Figma.

    $31 / hr (Avg Bid)
    $31 / hr (평균 입찰가)
    30 건의 입찰

    We have developed a confectionery product (a lolly in the size and shape of underwear) which we would like to manufacture and introduce to the Australian market. Part of the process requires the use of a silicone mat, which is what we would like you to design, please. We require an accurate, representative design in a STEP file format, which we can give to our silicone mold manufacturer. We have a clear design in mind and set of requirements, including the size being approximately 120cm by 50cm and a rose print lace design. We are looking for someone who is available to start working on this project as soon as possible - we look forward to hearing from you! Thank you. Marco

    $699 (Avg Bid)
    $699 (평균 입찰가)
    37 건의 입찰

    Redstone Group is currently looking for a Building Operator to join our Operations Team to oversee its commercial office buildings in Phoenix and surrounding areas. Redstone Group is a Canadian real estate company that own and manage all our assets. Our portfolio consists of both commercial and industrial buildings throughout Canada and the US. We are currently looking to fill this position with someone who is diverse in all aspects of maintaining and operating commercial properties. The successful candidate will work alongside other Building Operators and report to the Commercial Property Manager to work as a team to ensure the buildings are maintained in a first-class manner. RESPONSIBLITIES INCLUDE: · Manage daily building and mechanical inspections. ·...

    $25 / hr (Avg Bid)
    지역별
    $25 / hr (평균 입찰가)
    1 건의 입찰

    Marketing Strategist will devise, implement, and oversee end-to-end Marketing of our Industrial Internet of Things (IIoT) products and services. The incumbent will be responsible for branding, product positioning, channel development, advertising, and communication for the entire product portfolio of the company. He/ she will provide inputs for product development and the required product refreshments in order to successfully manage the Product Life Cycle. He will lead the task of identifying right channel partners for Indian, Middle Eastern and European markets. The incumbent will also be responsible for internal branding and messaging, developing Corporate presentations, literature and promotional videos. He will also help develop media strategy for the company, and engage right ...

    $7 / hr (Avg Bid)
    $7 / hr (평균 입찰가)
    2 건의 입찰

    Need to customize the WordPress theme - Theme Installed and ready - Customize as per the requirement and profile provided - Up to 10 pages - Need high quality, creative and professional work - Company profile will be provided - Image editing and replacement The theme link is: Please read project details carefully while contacting.

    $54 (Avg Bid)
    $54 (평균 입찰가)
    69 건의 입찰
    Data entry -- 4 종료 left

    ...the original notion;[1] it began with certain core applications of the word φύσις by pre-Socratic philosophers (though this word had a dynamic dimension then, especially for Heraclitus), and has steadily gained currency ever since. During the advent of modern scientific method in the last several centuries, nature became the passive reality, organized and moved by divine laws.[5][6] With the Industrial revolution, nature increasingly became seen as the part of reality deprived from intentional intervention: it was hence considered as sacred by some traditions (Rousseau, American transcendentalism) or a mere decorum for divine providence or human history (Hegel, Marx). However, a vitalist vision of nature, closer to the presocratic one, got reborn at the same...

    $298 (Avg Bid)
    $298 (평균 입찰가)
    20 건의 입찰

    Hi All, We are looking to hire a designer with experience in Photoshop, Illustrator, 3D art and other designing tools, to design and develop High Quality images for our Online store. Our range of products includes Household and Industrial Cleaning products such as Microfiber cleaning cloths, Non abrasive scrubbing sponges, etc. Thanks Siddharth

    $57 (Avg Bid)
    $57 (평균 입찰가)
    45 건의 입찰

    - Typical scaffold projects i.e. residential, commercial or even industrial projects

    $12 / hr (Avg Bid)
    $12 / hr (평균 입찰가)
    25 건의 입찰

    We are a co-working industrial facility in Brookshire, Texas and want to form a relationship with a safety consultant to effectively become our resident safety advisor. They would oversee OSHA compliance for the building in and provide individual services to our customers

    $25 / hr (Avg Bid)
    $25 / hr (평균 입찰가)
    1 건의 입찰

    We are seeking a videographer to capture some exterior shots of a building in The facility in Suzhou, China is a Hollingsworth & Vose building located at: No. 39 Song Bei Road, Suzhou Industrial Park, Jiangsu, China 215126 The contact there is Kathy Zhang * Jib shot of the building * Orbit shots of the building * Static shots of the building * If a sign is present, a shot of the sign in the foreground and building in the background All raw footage will be delivered to us via Google Drive. **Please respond with some recent relevant work** if you are interested Send me samples of your previous work via Google Drive link

    $30 - $250
    $30 - $250
    0 건의 입찰

    Salutare, Dorim sa lansam un magazin online cu profil industrial ( consultanta, mentenanta, furnizare echipamente si consumabile industriale ). Avem nevoie de un ajutor cu experienta in constructia site-ului. Domeniul este deja achizitionat de pe godaddy.com. Domeniul se numeste rohr.tech. In principiu ne dorim furnizori diferiti pentru servicii diferite. Pentru domeniu mergem in continuare cu , pentru gazduire site ne dorim un furnizor gen bluehost.com. Pentru design site + promovare + modificari ulterioare in arhitectura site-ului dorim sa lucram cu acelasi freelancer. Se doreste o colaborare de lunga durata. Solicitari obligatorii: 1.Site-ul va fi creat cu ajutorul platformei Magento. si functionalitatea trebuie sa fie asemanatoare cu site-ul 3. Site-ul

    $1112 (Avg Bid)
    $1112 (평균 입찰가)
    8 건의 입찰

    industrial design 커뮤니티 게시글 (최상위)