전기 공학 Jobs

Electrical engineering is a branch of engineering that involves the study of electricity, electromagnetism and electronics. An electrical engineer knows how to deal with a host of electrical appliances and devices. To ensure that your electrical device is compliant with the set standards, you need to hire a professional electrical engineer. For this, all you have to do is hire a professional electrical engineer. Once you have an experienced electrical engineer onboard you can hope to add a fillip to your business.

80311 건의 리뷰부터, 거래선 측에서는 저희 Electrical Engineers 분야의 작업자들에 대해 별점 5점 만점의 4.81 점으로 평가해 주실 수 있습니다.
더 알아보기

필터

내 최근 검색 기록
필터링 기준:
예산
최대
최대
최대
유형
보유 기술
언어
    프로젝트 진행 단계
    116 건의 일자리 확인, 급여 기준: USD

    I want to find the 3dB bandwidth of the figure. I hv files in .csv when the wavelength in Y axis and has scale in db...X axis has a scale in nm. one way is to find the maximum value at centre value and subtract with 3db. & find cross-sections of the spectrum corresponding x1 and x2 coordinates. result bandwidth (X2-X1 nm). Spectrum example as in attachment.

    $23 (Avg Bid)
    $23 (평균 입찰가)
    3 건의 입찰

    Need an expert in fault-tolerant embedded systems in the automotive domain.

    $108 (Avg Bid)
    $108 (평균 입찰가)
    7 건의 입찰

    I have a power supply board, physical board empty and a jpg of some changes to be made. The designer has the file and has gone missing in action. Need help to enter and revise so that new revised Gerber Files can be ordered. The attached doesn't show foil on top but shows foil on bottom.

    $502 (Avg Bid)
    $502 (평균 입찰가)
    14 건의 입찰

    Hello for everyone,I need simple design of THz photoconductive antenna using CST , with report. If anyone have experiences with it or ready project we can agreement. thank you

    $22 (Avg Bid)
    $22 (평균 입찰가)
    5 건의 입찰

    The task will take you through modelling 1. The f-I curve of the leaky I&F neuron 2. A dynamic synapse in an I&F neuron using MATLAB. Including Report Writng

    $108 (Avg Bid)
    $108 (평균 입찰가)
    3 건의 입찰
    Electrical eng project 6 일 left
    확인

    Design and specify the ratings of a single-phase transformer to supply several loads

    $23 (Avg Bid)
    $23 (평균 입찰가)
    23 건의 입찰

    Want to have online sessions to understand electrical schematic and data sheet of electrical control components like safety relays ,digital display ..etc

    $31 / hr (Avg Bid)
    $31 / hr (평균 입찰가)
    15 건의 입찰
    Design a PCB 6 일 left
    확인

    We are developing an IoT enabled Accident detection device for motorbikes.

    $47 (Avg Bid)
    $47 (평균 입찰가)
    15 건의 입찰

    Want to have online sessions face to face to understand electrical schematic and data sheet of electrical control components like safety relays ,digital display ..etc

    $13 / hr (Avg Bid)
    $13 / hr (평균 입찰가)
    12 건의 입찰

    Looking for MATLAB based simulink.

    $22 (Avg Bid)
    $22 (평균 입찰가)
    7 건의 입찰

    Need electrical drawings for room

    $6 / hr (Avg Bid)
    $6 / hr (평균 입찰가)
    17 건의 입찰
    MATLAB Code 6 일 left

    Write code in matlab to show simulation of universal robot 5

    $145 (Avg Bid)
    $145 (평균 입찰가)
    19 건의 입찰

    I am looking to calculate the average round trip delay in a serial 3-node using JDK/JVM Environment. More details can be shared in PM.

    $41 (Avg Bid)
    $41 (평균 입찰가)
    2 건의 입찰

    Want to have online sessions to understand electrical schematic and data sheet of electrical control components like safety relays ,digital display ..etc

    $16 / hr (Avg Bid)
    $16 / hr (평균 입찰가)
    16 건의 입찰
    Need suport with RFSoC 5 일 left
    확인

    We need an expert to make installation and configuration of these devices as below. We are trying to connect EK1HMC6350 to EK-U1-ZCU111-G we are trying make as device kit below Please check the link below before bidding in my project.

    $582 (Avg Bid)
    파워형
    $582 (평균 입찰가)
    17 건의 입찰

    I need someone to document my electrical panel in 3D showing all parts and creating a wiring harness. Experience with PLC layout and CNC Control panel layout design required. This is a Panel for CNC Routers and Mills.

    $21 / hr (Avg Bid)
    $21 / hr (평균 입찰가)
    19 건의 입찰

    Simulate Hybrid lifi wifi system

    $20 / hr (Avg Bid)
    $20 / hr (평균 입찰가)
    8 건의 입찰

    Hello there! I need someone to help me with a Nextion+Arduino project that I am working on. What I want you to do is to check the files that I have already made using Nextion Editor and Arduino to talk to each other. I'd like you to check them, improve them in terms of looks, operation and help me with what's undone. Basic idea is we have a display and Arduino and we want them to talk to each other all time and make the changes on Arduino side, I also have an I2C based battery fuel gauge IC so I'd like you to help me to track it's SOC as well. If you are someone who has worked with Nextion Displays and can do this, kindly bid. I'd prefer it if you have the display at your end and can test the firmware on Arduino and test the HMI interface on the display parallel...

    $91 (Avg Bid)
    $91 (평균 입찰가)
    11 건의 입찰
    BJT and MOSFET multism 5 일 left
    확인

    BJT and MOSFET multism

    $27 (Avg Bid)
    $27 (평균 입찰가)
    15 건의 입찰
    MATLAB Simulink Expert 5 일 left
    확인

    MATLAB Simulink Expert ................

    $6 / hr (Avg Bid)
    $6 / hr (평균 입찰가)
    2 건의 입찰

    I need someone who knows IPG software. We are making an electric vehicle for SAE e-Baja competition and currently doing simulation of our vehicle in IPG software

    $18 - $153
    $18 - $153
    0 건의 입찰

    I am looking for a Nvidia / Jetson Nano or Ubuntu Expert to help with converting a JETSON Nano into a kiosk. This requires : - removing splash screen - removing desktop - configuring custom splash screen - remove login screen - starting kiosk application using startup script.

    $275 (Avg Bid)
    $275 (평균 입찰가)
    2 건의 입찰
    PCB In India 5 일 left
    확인

    I need someone who can make a basic breakout board for VL53L0X sensor. Here is the datasheet You need to fabricate and assemble the sensor also

    $29 (Avg Bid)
    $29 (평균 입찰가)
    15 건의 입찰

    A small design of an optical network using optisys simulator.

    $23 (Avg Bid)
    $23 (평균 입찰가)
    3 건의 입찰

    Step 1 Create a schematic diagram. You may create your schematic in either Eagle or PADS Logic. Step 2: Import the schematic diagram into PADS Layout. Step 3: Create the Gerber files for manufacturing the board You need to send the following: bottom layer, top layer, outline, and drill. Include the board file as well. The extension changes depending on the software. Pad Stack 30 mils Clearance 14 mils Trace Width Max: 180 mils Min: 18 mils •pcb design must meet the following drill bit guidelines: Function Size (mm) Size (mils) Trace 0.5 20 Trace 1.00 39 Trace 2.00 79 Drill Hole 0.5 19.7 Drill Hole 0.6 23.6 Drill Hole 0.7 27.6 Drill Hole 0.8 31.5 Drill Hole 0.9 35.4 Drill Hole 1.5 59.1 • Only PCBs from PADS are supported. Use only the drill size specifications listed above ...

    $168 (Avg Bid)
    $168 (평균 입찰가)
    23 건의 입찰

    Need someone good in electrical field or power or electronic fields that can rewrite files!

    $18 (Avg Bid)
    $18 (평균 입찰가)
    49 건의 입찰

    HI I NEED a good engineer or professional to do the power distribution analysis for my work.

    $5 / hr (Avg Bid)
    $5 / hr (평균 입찰가)
    7 건의 입찰

    There is a need for a small code using the Matlab K-wave toolbox. It's in 2-dim for sound propagation around a static hard element that can be shaped at will and to be covered with materials also to be chosen. Starting from a simple noise barrier erected on a surface, and then to be altered in shape and surface coverings, patch- wise. Sound source: circular, omnidirectional. Simulation for a time laps of noise mapping around the barrier, and for frequency as a control parameter. The purpose is to calculate the sound pressure level over a flat terrain, and then again with the noise barrier erected and study the difference of sound pressure levels and its variation by combining various shapes and materials of the barrier. If instead solved by other FEM/BEM-based software, then please ...

    $94 (Avg Bid)
    $94 (평균 입찰가)
    4 건의 입찰

    It’s a Rooftop Solar project size 1MW

    $115 (Avg Bid)
    $115 (평균 입찰가)
    8 건의 입찰

    It’s a Rooftop Solar project size 1MW

    $120 (Avg Bid)
    $120 (평균 입찰가)
    6 건의 입찰

    developing macros in eplan for typical substation bays

    $521 (Avg Bid)
    $521 (평균 입찰가)
    8 건의 입찰

    Electrical engineer, programmer website developer and designer in need

    $467 (Avg Bid)
    $467 (평균 입찰가)
    24 건의 입찰

    I am looking for engineers to come and help us at our honey production site. We need temporary help with project, breakdown and PPM work. Food manufacturing or other type of manufacturing engineering skills would be advantageous

    $37 / hr (Avg Bid)
    $37 / hr (평균 입찰가)
    16 건의 입찰
    sound engineer 4 일 left

    remove static or instrument for 3 mp3's

    $23 (Avg Bid)
    $23 (평균 입찰가)
    17 건의 입찰

    We need Transformer Substation Design & Sectional Layout for 2 Pole, 4 Pole and PCC Pedestal Mount with Yard details complete in Autocad format.

    $86 (Avg Bid)
    $86 (평균 입찰가)
    4 건의 입찰

    Antenna Designer is required having expertise in AWR software.

    $167 (Avg Bid)
    $167 (평균 입찰가)
    7 건의 입찰

    Need assistance with electrical engineering / conceptual modeling

    $168 (Avg Bid)
    파워형 상금 보장형
    $168
    8 건의 응모작

    Hi we want to develop and centralized system that take input from several sensors and turn on/off relay based on different logic that are set dynamically. Developers from India will be given a higher priority. Only 1 MCU with very high pin count to be used like NXP, Cypress, STM etc

    $1208 (Avg Bid)
    $1208 (평균 입찰가)
    17 건의 입찰

    Project to be done in VHDL, so I am looking for an expert. The objective is to create a testbench for one circuit, and simulate the a few operations including storing data in it as well as retrieving data from it. I can share more details in PM.

    $30 (Avg Bid)
    $30 (평균 입찰가)
    4 건의 입찰

    I need a matlab expert who can work on wind energy related MATLAB simulink. must have worked before on similar projects

    $30 (Avg Bid)
    $30 (평균 입찰가)
    10 건의 입찰
    PSCAD Projecr 4 일 left

    Transient Short circuit by PSCAD All details are depicted in the uploaded pdf file

    $141 (Avg Bid)
    $141 (평균 입찰가)
    8 건의 입찰
    need a matlab expert 4 일 left
    확인

    details will be share to the final person choosen for this

    $429 (Avg Bid)
    $429 (평균 입찰가)
    39 건의 입찰

    Hello I need an expert in Matlab for simulation please apply if you have the required expertise. No teams or companies please.

    $100 (Avg Bid)
    $100 (평균 입찰가)
    18 건의 입찰

    Hello, we need a 240V outlet to be installed in the garage so that we can plug in a level 2 electric vehicle charger. Our electrical box is 200 Amps with six available slots. The basement is unfinished and it's about 35 feet from the box to the garage wall, which is attached to the house. The make of the panel is Siemens EQ Loadcentre.

    $343 (Avg Bid)
    $343 (평균 입찰가)
    18 건의 입찰

    Convert large amounts of raw *.mat data files into *.cvs (*.txt) files, which can then be use to graph the data. The raw data file are Matlab type with the file extension "data.m" Each of the data file has embedded values of energy joules (J), along with the Year/Month/Day time stamp. Compile the data and generate monthly graphs to show the energy values in x-y format. Uploaded with the posting: A detailed project description is provided, as well as pre-written code with many of the calculations already completed. Also, a sample of the raw matlab file is uploaded. • Due to export law restrictions of data and IP technology, only programmers which reside in the USA are eligible to bid. • Project budget range: $1000 to $1200. • Completion schedule: 30 d...

    $1164 (Avg Bid)
    $1164 (평균 입찰가)
    24 건의 입찰
    Electonic Work 3 일 left
    확인

    Source design and drive manufacturing of a small simple LED light PCB Dia >=10 mm

    $281 (Avg Bid)
    $281 (평균 입찰가)
    42 건의 입찰

    Project to be done in VHDL, so I am looking for an expert. The objective is to create a testbench for one circuit, and simulate the a few operations including storing data in it as well as retrieving data from it. I can share more details in PM.

    $38 (Avg Bid)
    $38 (평균 입찰가)
    6 건의 입찰

    Hi noumanmehtab86, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $1120 (Avg Bid)
    $1120 (평균 입찰가)
    6 건의 입찰
    servomotor in vhdl 3 일 left
    확인

    separate project in 3rd part, first make the chdl codes according to the state machine as well as their test ban (Reception and emission), make a top entity etc...

    $44 (Avg Bid)
    $44 (평균 입찰가)
    5 건의 입찰

    Need help with simulink matlab. ( medical Eng) I got 5 hours left

    $128 (Avg Bid)
    $128 (평균 입찰가)
    26 건의 입찰