구조 공학 Jobs

Structural Engineering is a specialty field of civil engineering that deals with the design of structures that support or resist loads. Structural engineers are involved in the design of building and machinery structures. If your business works with structural engineering technology on a regular basis, you might find help from freelancers useful. You can contact freelancers who are specialized in structural engineering right here. Post your structural engineering job today!

28701 건의 리뷰부터, 거래선 측에서는 저희 Structural Engineers 분야의 작업자들에 대해 별점 5점 만점의 4.79 점으로 평가해 주실 수 있습니다.
더 알아보기

필터

내 최근 검색 기록
필터링 기준:
예산
최대
최대
최대
유형
보유 기술
언어
    프로젝트 진행 단계
    47 건의 일자리 확인, 급여 기준: USD

    I have a few questions related to production engineering. They are about electronic device, but only about the mechanical parts of it: retractable cable reels and methods of attaching the device to the desk. There aren't any big forses or energies, the questions are fully about shapes of parts and how to produce them. I would like to have a call for a few hours with a specialized in this field engineer for me to know more about this. I can of course provide all of the needed detail beforehand.

    $33 / hr (Avg Bid)
    $33 / hr (평균 입찰가)
    7 건의 입찰

    Concrete abutment should be designed as retaining wall in our case. Design will consider the possibility of deep-seated slope failure under the base of the retaining wall and potential scour of the batter slope. Prelimianry Calculations and diagrams as per Australian Standards

    $61 (Avg Bid)
    $61 (평균 입찰가)
    3 건의 입찰

    Design flitch beam to support floor joists after removing single brick supporting wall

    $124 (Avg Bid)
    $124 (평균 입찰가)
    19 건의 입찰

    Produce architectural and Structural drawings for a 2 story house, complete with all also electrical and mechanical drawings. The building is full Concret and block work.

    $12 / hr (Avg Bid)
    $12 / hr (평균 입찰가)
    24 건의 입찰

    Produce architectural and structural drawings for a 2 story building.

    $11 / hr (Avg Bid)
    $11 / hr (평균 입찰가)
    22 건의 입찰

    We have completed architectural drawings for a 3 story 11m x 50m building. We need details structural drawing. The building is full Concret structure with block work and concrete columns.

    $14 / hr (Avg Bid)
    $14 / hr (평균 입찰가)
    28 건의 입찰

    I have a 1450 sq ft home that will be using all electric heating. A heat pump , air handler , ductwork. I need a manual c D J CALCULATIONS for the house. I have the layout. I have the specs that it has to be within we will discuss details if anything further require, I am available thank you I am Looking for somone who has experience in Building information Modeling.

    $73 (Avg Bid)
    $73 (평균 입찰가)
    6 건의 입찰

    Wanted a structural engineer to design a plan for my property remodeling.

    $36 / hr (Avg Bid)
    $36 / hr (평균 입찰가)
    19 건의 입찰

    Bar Bending Schedule Calculations should be done as per structural drawings provided

    $2 / hr (Avg Bid)
    $2 / hr (평균 입찰가)
    22 건의 입찰

    There are five permit plans for a house renovation project that need to be converted from pdf to audo cad. These converted plans are to be used by a structural engineer to make modifications to the project and resubmit. See attached example.

    $102 (Avg Bid)
    $102 (평균 입찰가)
    87 건의 입찰

    Looking to put a opening in a load bearing wall there is allready a opening but has a 650 nib on both sides in the kitchen I want to remove to a 200 nib and put in a rsj about 2.5 m long block wall continues on first floor not bearing the roof the door in kitchen is now blocked up

    $129 (Avg Bid)
    $129 (평균 입찰가)
    20 건의 입찰

    Looking to put a opening in a load bearing wall there is allready a opening but has a 650 nib on both sides in the kitchen I want to remove to a 200 nib and put in a rsj about 2.5 m long block wall continues on first floor not bearing the roof the door in kitchen is now blocked up

    $132 (Avg Bid)
    $132 (평균 입찰가)
    10 건의 입찰

    We need to have a wall redesigned.

    $1845 (Avg Bid)
    $1845 (평균 입찰가)
    33 건의 입찰

    As a project consultant, I’m working for a client on a project that needs a secondary means of escape to be created in the basement of an occupied house. I’m looking for someone that knows the regs and can take existing build drawings (pdf format only) and provide structural alteration design to existing 200mm thick RC wall and new build external stairs (Concrete) up to grd level. Update existing floor plan (pdf) to show the new escape route and details of the minimum door size needed for this escape. This will enable me to get building control approval. Project is live and my ground worker is ready to start so I needs someone available now and knows what they are doing and knows the uk regs. This isn’t a big job but I have other projects in the pipe line. The person ...

    $283 (Avg Bid)
    $283 (평균 입찰가)
    18 건의 입찰

    Develop boq quantity, gusset,plate with full material detailing according to GA Drawing

    $179 (Avg Bid)
    $179 (평균 입찰가)
    6 건의 입찰

    The house has 2 rooms in the top floor. My builder has stripped them out, and I would like to open the rooms up to one large space with a vaulted ceiling (the ridge ht is approx 3.8 metres from floor) and a large dormer to the rear. I would like to look at raised tie trusses if feasible. . I have attached photos of the before and after strip out and can provide architectural drawings too if required.

    $54 / hr (Avg Bid)
    $54 / hr (평균 입찰가)
    33 건의 입찰
    Bridge Design 4 일 left
    확인

    Design specifications: The gap of L=1.5 m (clear span of the bridge model) needs to be bridged using any wood material. Any material can be used to join parts. The bridge needs to sustain three concentrated loads of 7.0 kg, 5.0 kg and 4.0 kg, without breaking (i.e. the mass to be supported by the bridge without falling onto the ground); three buckets with handle will be utilized to apply the concentrated loads along the bridge model. Appropriate attachment arrangements must be included in the design of the model (e.g hooks), to support the plastic buckets. The weight of the attachments will not be included in the weight of the bridge. The attachments should be placed along the bridge model at the indicated positions. The points A and B must be marked on the bridge model. The structu...

    $95 (Avg Bid)
    $95 (평균 입찰가)
    12 건의 입찰

    I have modelled a steel building on staad pro and have assigned design parameters too. I want some one to optimize the steel sections and design the different connections and give me the detailed drawing.

    $21 (Avg Bid)
    $21 (평균 입찰가)
    10 건의 입찰

    As a project consultant, I’m working for a client on a project that needs a secondary means of escape to be created in the basement of an occupied house. I’m looking for someone that knows the regs and can take existing build drawings (pdf format only) and provide structural alteration design to existing 200mm thick RC wall and new build external stairs (Concrete) up to grd level. Update existing floor plan (pdf) to show the new escape route and details of the minimum door size needed for this escape. This will enable me to get building control approval. Project is live and my ground worker is ready to start so I needs someone available now and knows what they are doing and knows the uk regs. This isn’t a big job but I have other projects in the pipe line. The person...

    $133 (Avg Bid)
    $133 (평균 입찰가)
    24 건의 입찰

    We are looking for a MEP consultant on hourly basis work.

    $8 / hr (Avg Bid)
    $8 / hr (평균 입찰가)
    4 건의 입찰

    Need building plan drawn up on the premise land with scales

    $19 (Avg Bid)
    $19 (평균 입찰가)
    38 건의 입찰
    $19 / hr (평균 입찰가)
    35 건의 입찰

    We need a structural engineer to do done calculations advice improving structural capabilities on a roof which is of non standard construction with Coro tile . We want to change roof but need to know what needs to be done to carry additional weight etc .

    $417 (Avg Bid)
    $417 (평균 입찰가)
    40 건의 입찰

    Hi we have a 4br 2 ba 2garage home that needs engineering. Many engineers in our area have long wait times so we are posting to see can shake someone else out . Thanks kate

    $1964 - $3274
    봉인형
    $1964 - $3274
    24 건의 입찰

    Hi we have a 4br 2 ba 2garage home that needs engineering. Many engineers in our area have long wait times so we are posting to see can shake someone else out . Thanks kate

    $2275 (Avg Bid)
    $2275 (평균 입찰가)
    22 건의 입찰

    I am just/only looking for the architectural drawing to do the project described below so that the necessary township permits can be acquired. Expand powder room (by taking space occupied by coat closet and part of foyer) into an ADA compliant bathroom with a curbless shower with frameless glass door, additional door, relocated existing door, repositioned wall mounted sink, repositioned wall mounted toilet with concealed cistern, new tile floor, repositioned mirror, repositioned above sink light, new above toilet cabinet, medicine cabinet, additional ceiling light(separate from fan), relocated light switch, relocated fan switch, relocated outlet, additional vent into foyer Convert office to bedroom by relocating entrance, replacing door with privacy door, adding new door to bathroo...

    $1077 (Avg Bid)
    지역별
    $1077 (평균 입찰가)
    24 건의 입찰

    hi ,I am Looking for somone who has experience in Building information Modeling. Needed somone having this background HVAC System Drawings Ø HVAC Heat Load CalculationØ House Drawings MEPØ Bill of Materia Ø Bill of Quantity. I have ...sq ft home that will be using all electric heating. A heat pump , air handler , ductwork. I need a manual c D J CALCULATIONS for the house. I have the layout. I have the specs that it has to be within we will discuss details if anything further require, I am available thank you

    $22 (Avg Bid)
    $22 (평균 입찰가)
    9 건의 입찰

    Build home but the Engineer has given me rough plan of Gr floor and 1st floor sloping roof top All work is completed but wanted plan of the house

    $233 (Avg Bid)
    $233 (평균 입찰가)
    43 건의 입찰

    Steel Frame (3D space truss)for supporting Air Dome. Requirement: Before starting, please provide us with proposal for what you will present in the design, free hand drawing or cad or any.. 1-Design 3d space truss from pipes or Angles for supporting Air Dome for Sports Hall using software (SAP2000 or STAAD Pro) 2-Shop drawing from tekla. 3-Calculation note to be approved from our consultant. 4- If any comments from consultant after reviewing, you should reply by another revion until we get Final Approval.

    $431 (Avg Bid)
    $431 (평균 입찰가)
    40 건의 입찰
    Structural engineer -- 2 2 일 left
    확인

    I want to Remove load bearing wall

    $379 (Avg Bid)
    $379 (평균 입찰가)
    34 건의 입찰
    Structural engineer 2 일 left
    확인

    I want to Remove load bearing wall

    $390 (Avg Bid)
    $390 (평균 입찰가)
    23 건의 입찰

    valuation as part of mortgage application on property in WA14 identified cracks in wall and requested a structural engineer report.

    $388 (Avg Bid)
    $388 (평균 입찰가)
    21 건의 입찰
    partitian wall 2 일 left

    i require a structural engineer to confirm this 'wall' is non structural or loadbaring

    $43 / hr (Avg Bid)
    $43 / hr (평균 입찰가)
    24 건의 입찰

    we have a basic louver design H= 4750mm W= 15400mm with motorized sliding door. we need a structural design for the steel structure FRAME including the concrete raft foundation.

    $128 (Avg Bid)
    $128 (평균 입찰가)
    32 건의 입찰

    Replacing trusses on my house. Need someone to create truss detail documents

    $982 (Avg Bid)
    $982 (평균 입찰가)
    43 건의 입찰

    Need consultation on desire to remove all or half of small but supporting wall with sheething and replace it safely with posts and a large beam. See attached photo.

    $433 (Avg Bid)
    $433 (평균 입찰가)
    37 건의 입찰

    We are an electrical contractor and we have excavated and installed formwork and rebar for a parking lot pole fixture. We were informed by the municipality that they require stamped engineering drawings before they will inspect and approve us to pour concrete. I have made as-built drawings showing what we installed. We need a Missouri licensed structural engineer to either A) sign off on the as-builts, or B) redesign the drawing and we will make adjustments to the existing work to meet code. As built drawings are attached. The pole is an existing 4" x 25' square steel pole, 11ga. As this is a pole that was previously installed at the same site, I do not have a spec sheet. (2) fixtures will be direct arm mounted in a 180 degree orientation to each other at the top of the po...

    $170 (Avg Bid)
    $170 (평균 입찰가)
    12 건의 입찰
    Bathroom wall 1 일 left

    We need a report for the removal of an internal load bearing wall

    $473 (Avg Bid)
    $473 (평균 입찰가)
    16 건의 입찰

    I own a small business selling pet products in Australia. One of the products we are working on is basically a large planter box full of soil and a few plants and/or turf. I need written advice from a structural engineer stating whether balconies and decks would be able to hold the weight of these large planter boxes, based on Australian building standards? As we would be marketing to a large range of customers, I can't give any specific details about what types of balconies or decks they may have, so advice would need to be general. Each planter box will measure 100(L) x 80(W) x 23(H) cm, which, when filled with wet soil and plants apparently can weigh 200kg (or let's say up to 300kg in the worst case). Can one or more of these be safely placed on balconies? How many could be...

    $104 (Avg Bid)
    $104 (평균 입찰가)
    23 건의 입찰
    Tekla Drafting 22 시간 left
    확인

    Looking for a draftsperson who is highly experienced with Tekla and can do steel detailing and fabrication drawings to work on an hourly rate to take overflow work from our design team.

    $40 / hr (Avg Bid)
    NDA (비밀 유지 계약서)
    $40 / hr (평균 입찰가)
    41 건의 입찰
    Retaining wall calculations 20 시간 left
    확인

    Review and check specifications on plans and details to verify if concrete retaining wall design will be sufficient for load bearing requirements. Must provide complete calculations in professional format PDF.

    $152 (Avg Bid)
    $152 (평균 입찰가)
    29 건의 입찰

    Looking for a professional architect who can design and provide full set of architectural + structural drawings for a 45’ container home

    $311 (Avg Bid)
    $311 (평균 입찰가)
    33 건의 입찰

    I have a carport that is 36 feet long and 11 feet wide with one side supported by the house and the other by 7 posts each bolted down and 6 feet apart. I want to remove 2 posts and replace them with cables on top and on the bottom so the load is carried by the post 12 feet in from the outermost corner. The cables will be installed just like bridge support cables per the attached drawing. The carport must be able to hold 15 inches of snow. The goal is to show the city building department that this has been reviewed and certified by an acceptable engineer to the city. I have no idea what the city requires. The city is Chino Valley Arizona.

    $25 / hr (Avg Bid)
    $25 / hr (평균 입찰가)
    27 건의 입찰

    Estoy buscando un diseñador estructural (ingeniero civil o mecánico) de estructuras metálicas, para torres de soporte de líneas de alta tensión eléctrica. Debe poder diseñar las cimentaciones y estructura metálica de las torres.

    $1212 (Avg Bid)
    $1212 (평균 입찰가)
    15 건의 입찰

    Tasker: I'm moving in a Jewlery Safe (approx 1,500 pounds) into my building. I need a report that says it's okay for the safe to be in my room (the floor will withstand the weight). Background: The report I will need is just a formality required by building management. It's a commercial building with metal/concrete support. I don't see any issue with the safe being there as it's a commercial building. The safe weighs approx. 1,500 pounds. What you'll be provided: * Floor Plans * The Suite #

    $423 (Avg Bid)
    $423 (평균 입찰가)
    37 건의 입찰
    change structure 종료 left
    확인

    I have a structural design of my house plan. i need to change it.

    $120 (Avg Bid)
    $120 (평균 입찰가)
    65 건의 입찰

    COUNTING EVERY DROP CHALLENGE PHASE 1 Design an Innovative Precipitation Measurement Device Important: Please read the full Challenge Rules that contain all the challenge and submission requirements and rules. CHALLENGE RULES: REGISTRATION FORM: WEBINAR RECORDING: FAQ (Last updated: September 13, 2022): Phase 1 Start: August 04, 2022 Phase 1 Submission Deadline: October 24, 2022 at 5:00pm ET Phase 1 Total Prizes: Up to $80,000 USD. —------------------------------------------------------------------------------------------------------------------ The Counting Every Drop Challenge seeks new devices that will better inform water management decisions critical for human safety and environmental health, including forecasting water supplies, monitoring water-year p...

    $10000 (Avg Bid)
    파워형 봉인형 최상위형
    $10000
    4 건의 응모작