Design a Working Arduino Based Solar MPPT Charge Controller Capable of Delivering 100Amps

$30-250 CAD

종료됨

게시됨

거의 4년 전

$30-250 CAD

제출할때 지불됩니다

Design an Arduino Based Solar MPPT Charge Controller. This Solar Charge controller will be used in a production environment for a Solar Panel systems configured with the following technical specifications. Overall Wattage of the Solar System: 5000 Watts Unit Rating of Each Solar Panel: 350 Watts PV : 48VDC Open Circuit Current: Close to 10Amps So with the above information, here's the Specification of the project: [login to view URL] project is Based on MPPT(Maximum power point tracker) algorithm 2. LED indication to show the low mid and high level of charge stat 3. LCD (20×4 character ) display for displaying power,current,voltages etc 4. Lightning /Over voltage Protection 5. Protection For Reverse power flow 6. Over load & Short Circuit protection 7. Logging data through WiFi 8. Battery reverse polarity, over-charge and over-discharge protections 9. System over-temperature and ambient light detection capabilities Electrical specifications : [login to view URL] Rated Voltage= 12-60VDC [login to view URL] output current =100A [login to view URL] Voltage = Solar panel 48VDC [login to view URL] of Solar panel = 350 Watts 5.97% efficiency Some reference URL with similar solutions; [login to view URL] [login to view URL] [login to view URL] I will need to see past references of your past work in Power Electronics and Arduino to want to engage in a meaningful discussions regarding this project. If you have any questions let me know before you place a bid.

Arduino

Electronics

Microcontroller

Electrical Engineering

Circuit Design

프로젝트 ID: 25870039

프로젝트 정보

13 제안서

원격근무 프로젝트

활동 중 4년 전

돈을 좀 벌 생각이십니까?

이메일 주소

프리랜서 입찰의 이점

예산 및 기간 설정

작업 결과에 대한 급여 수급

제안의 개요를 자세히 쓰세요

무료로 프로젝트에 신청하고 입찰할 수 있습니다

13 이 프로젝트에 프리랜서들의 평균 입찰은 $644 CAD입니다.

@seshupower

Hi, I am a post graduate power electronics engineer and having very good industrial experience of 8+ years in R&D and project development. I am excellent welding power supplies design, Plasma ARC power supplies, high frequency transformers design, solar grid tie transformers, electrical vehicles design, circuits design, multi-channel LED Drivers, Regulated power supplies design with universal input to DC output, Audio amplifier, drives design, Filters design for harmonic analysis and Power factor correction, SMPS, LED drivers, DC-DC, AC-DC converters design, PFC interleaved boost converter, Battery management system, Battery chargers, UPS design, sine wave Inverters, solar grid tie inverters, Solar battery chargers and street light systems design from few watts to KW range using Buck, Boost, and Buck –boost, Interleaved boost/buck, Fly back Push Pull and H-bridge inverters. I have very good experience to design high voltage power supplies up to 50KV for capacitor charging power supplies using soft switching topologies. I have work experience to design from few watts to KW range meeting all compliances like EMI/EMC and safety standards UL etc.

$5,000 CAD 60일에

4.9

(62 건의 리뷰)

6.8

@binyameen441

Hello, thank you for your job posting. I read your description about--Arduino I am a senior electrical engineer. I have plenty of experience in firmware development and micro-controller developments. I can write the firmware based on Arduino, Raspberry Pi, Pic, Atmega, FPGA, ARM, DSP, PLC and so on. And I can design the circuit by the Altium, Eagle, KiCAD, Allegro & OrCAD, PADs. I provide the services - Gerber files, Netlist generation, BOM generation and 3D Models of PCAD and ECAD. I am also good at AutoCAD, Solidworks. And I can simulate all circuits with Proteus, LT-spice, Matlab, Simulink, Multisim, and Labview as well. Due to my experience in firmware development, I will bring you the perfect result in time with high quality. I will also give you a detailed explanation of the process. Looking forward to hearing from you soon Thanks

$60 CAD 3일에

5.0

(109 건의 리뷰)

6.3

@Mauricio768

Dear Client. I have just read your job description and your project is really interesting to me. I have many experiences working for 7+ years with Circuit design, PCB design, manufacturing functional prototyping with firmware programming and testing especially. Here are some of the experiences that I built ago. - Schematic and PCB design and Layout using Altium Designer, Eagle, KiCAD, OrCAD. - high-speed, flexible, Multi-Layer PCB design. - DDR, motor control, power converter, UART, SPI, I2C, RF, BLE design - ARM, DSP, MCUs, Arduino, Raspberry pi experiences. I am sure I can complete it on time with high quality. If you hire me, I can start to work for your job immediately. I'll do my best for you. Thank you for your time. Best regards.

$150 CAD 7일에

5.0

(10 건의 리뷰)

4.2

@solaceengineers

We have already developed a solar charge controller and it's in our portfolio! Please have a look and let us know your thoughts...

$250 CAD 7일에

4.4

(4 건의 리뷰)

5.0

@rochaksharma7

hello sir. I have just read your job description and your project is really interesting to me. The Items you raised are similar to what I have already done in practice and I think you can do it in a short time if you have a little explanation. I'm an expert having specialization in Electronic Engineering Design. ✔️ Embedded system based on Microcontroller (ATMEGA, AVR, STM8, STM32, MSP430, TMS320, PIC ...) ✔️ Python with Deep Learning, Machine Learning ✔️ Python with Data Science ✔️ A system based on development boards(Arduino, Raspberry PI, Node MCU, Bluechip, Teensy,…) ✔️ Antenna design & Analog circuit/RF communication circuit designing and simulation using Proteus, P-Spice, Tina Pro, ADS, CST, Ansys, HFSS ✔️ Bluetooth, WIFI, zigbee, LoRA ✔️ High-Speed layout using HyperLynx ✔️ PCB layout designing, providing GERBER and BOMs, 3D files using Altium, EAGLE, Kicad, EasyEDA… ✔️ Programming firmware of Microcontroller & C++ ✔️ BMS I think my many design and practical experiences can help you design your project and give you enough satisfaction. I look forward to your response. Best Regards.

$50 CAD 7일에

5.0

(8 건의 리뷰)

3.5

@shaileshsannu

Hello l'm interested in your project. I'm electronic and communication engineer. I have 4 yrs experience in embedded system and it's designing. I have done many projects on industrial/home automation using u-controller and processor in past . Ping me to see the specimen of my previous work. For more information visit my profile. Feel free to contact me. Thank you

$67 CAD 2일에

4.6

(6 건의 리뷰)

2.9

@SheraAlvi

hi i have read your project details. its very interesting project for me because i have experienced of like these projects. i can do this project for you. its pleasure for me to work with yoy. thanks

$222 CAD 6일에

0.0

(0 건의 리뷰)

0.0

@mdferdous112

Dear dir, with veneration & profound respect i want to inform you that, i am a PowerPoint designer. I attended a lot of competition on PowerPoint design. Hope that you will be satisfied by my design. Relevant Skills and Experience I attended a lot of PowerPoint design competition. And most of the time i bacame champion.

$156 CAD 3일에

0.0

(0 건의 리뷰)

0.0

@aditipohekar

Hello, I have 6 years of experience of working on product development, circuit designing, PCB layout and firmware programming. I have worked end-to-end on various products with varied level of complexities, which included features like motor control, MCU programming, BLE, interfacing sensors using USART, I2C, SPI etc. Although I have decent experience of working with both corporate and academia, I am new to freelancing. Therefore I am looking forward for good learning experience and networking. I believe that I would be able to deliver the work effectively. You can go through my profile for further details. Looking forward for your positive reply.

$89 CAD 7일에

0.0

(0 건의 리뷰)

0.0

@vishal001024

I Have 5+ years of experience with Circuit/layout design. Can help you with complete product development including programming and manufacturing details.

$1,500 CAD 30일에