Software development for ESP32 and future nRF528xx and nRF9160

$250-750 USD

완료함

게시됨

4년 이상 전

$250-750 USD

제출할때 지불됩니다

We need to have small keyrings/watchsize/wearable IoT devices with various functionality to track and connect to both bluetooth and wifi. Especially BLE is of interest. Optionally to NB-IoT, LTE-M and LoRa Must have long standbytime, so understanding the concept of programming for ultralow power consumption is a must. You have to show, real experience and understand how to program use the Arduino IDE or Segger IDE. There is a number of dev./eval. Kits that will be provided. Can also use remote units connected to an laptop with Arduino IDE and Teamwiever. We might also consider a combination of nRF9160 and ESP32 for NB-IoT/LTE-M to Wifi and BLE Being able to implement the following sensors/peripherals in software, digital I/O, analog I/O, sensor over I2C, I2S, STI: 1) Environment sensors for air pressure, humidity, temp, and gas-sensor. Eg. BOSCH BME280 / BME680 and others. 2) Acceleration/compass component like: InvenSense MPU-9250, ST LIS2DH12, etc. 3) GPS, Glonass, Baidu, etc. position systems. 4) Calculation accurate distances by e.g. using HaverSine lib. 5) Calculate indoor position by calculating floor (e.g. heigh from barometric pressure), and triangular calc of wifi/BLI points. 6) Communicate using REST API, eg. aREST lib. 7) Communication over BLE Mesh architecture. 8) Present data on local LED display etc. 9) Present, store and retrieve data to/from the IOTA crypto network. 10) More to come. We try to break down project in small modules that should be possible to test and simulate individually. We can offer pament per well defined module and/or per hour.

Software Architecture

프로젝트 ID: 21225156

프로젝트 정보

19 제안서

원격근무 프로젝트

활동 중 5년 전

돈을 좀 벌 생각이십니까?

이메일 주소

프리랜서 입찰의 이점

예산 및 기간 설정

작업 결과에 대한 급여 수급

제안의 개요를 자세히 쓰세요

무료로 프로젝트에 신청하고 입찰할 수 있습니다

프로젝트를 수여된 사용자:

@AndrijIN

Hi! I have experience working with Bluetooth Classic/BLE partucularly with ESP32 and in less part with nRF52832. We have used the ESP32 in a battery supplied product so keeping the current consumption at lowest possible level was a key point. It appeared that the ESP is quite power hungry IC even in low power mode or in sleep mode (running only the RTC co-processor). For a wearable device I may suggest to use the nRF products from Nordic semiconductors, they are way more power efficient tough more expensive too. I have my development tools, but can help you on your side as well, setting them up or adjust if needed. I can help you to add the necessary sensors and peripherals to your device as you've mentioned in your description.

$500 USD 30일에

5.0

(13 건의 리뷰)

4.9

19 이 프로젝트에 프리랜서들의 평균 입찰은 $525 USD입니다.

@DevStar925

How are you? Like you see in my profile and portfolios, I have rich experience in C/C++, C#, and Python programming as well as microcontrollers. Especially, I completed many arduino and raspberry pi projects for such features. I would like to discuss with you and get more detail requirements. Please give detail requirements, then I will provide best solution for you. Thanks

$500 USD 7일에

4.9

(80 건의 리뷰)

7.4

@mechatronicsengr

Hi, I hope you are doing well. I have expertise in Arduino Projects. I have worked on LTE, NB-IoT, BLE Mesh, Nrf52840, Lora Modules using Arduino IDE. I have understood your requirements and would like to discuss it further. Looking Forward, Khawaja

$500 USD 7일에

4.8

(95 건의 리뷰)

6.9

@ahmad5857

Hi Sir, We offer you our services to you for this project. Lets talk to us. We are professional engineers and developers who do such projects from the last 10 years. We offer you our skills for this project at very low rates comparatively without compromising the quality of work. Let me introduce you to our company TURKTRONICS. We are TURKTRONICS. We are team of professionals with 10+ years of experience in Circuit designs, PCB designs, embedded system solutions, mobile app development, programming and software development. We provide complete end to end solutions for all kind of development projects. IOT is our strong point. In this bid, prototyping and shipping cost is not included however paying extra slight of money to include prototypes. We have the manufacturing facility and we produce the very high standard PCB boards and send ready products to customers doorsteps via DHL. We care about our clients and help them to get out of any potential problem throughout the projects and also give post completion technical support if ever required. We are very much looking forward to hear from you on this in coming days! Cheers!!! Ahmad Lead Technical Engineer TURKTRONICS An Internet of Things Company !

$450 USD 5일에

4.8

(56 건의 리뷰)

6.9

@MElizabethp

Hello My name is Maria, Im an electronic engineer with a lot of experience in ESP32 projects . I am very professional doing my job and I would like to know more about your requeriments to be part of your project. I will be here to talk to you. Regards

$750 USD 7일에

4.9

(15 건의 리뷰)

6.4

@ircrashed

Hello I have got your job posting “Software development for ESP32 and future nRF528xx and nRF9160” and I am very much interested to work in your project. I am a circuit designer and have more than 5 years experience of working with the Analog/Digital Electronics Embedded systems(Arduino,Rasberry pi ,ARM processors ,PIC microcontrollers,Wireless boards/Wifi/BLE ,TFT Touch Displays,All types of sensors and actuators). i have done tons of similar projects So, I think you’ll find that, I have the skills you’re looking for. For more on my skills and successfully finished projects, please have a look on my Profile and Portfolio. I have all the components available here with me so i will develop a working prototype according to your specifications and then send you the code and schematics so things will work for sure.I will remotely guide you and help you build the system on your side. I am always available on Email and Skype. Please have a voice or video chat if necessary. I shall be available round the clock and able to start your project as soon as possible according to you. Thank you for your consideration, Best Regards, Haseeb Shafqat

$400 USD 7일에

4.7

(50 건의 리뷰)

5.7

@stefanache

Hello, I already have the esp32 on stock. So I will buy one nRF9160 and then I will give you one tested solution Also I have some sensors if need I will buy the rest. I invite you to continue the discuss on the freelancer's chat. Thanks.

$1,000 USD 15일에

4.7

(7 건의 리뷰)

4.9

@noumanalishakir

Hello, I am Electrical Engineer and interested in your project. I have some questions regarding your project. Please tell me about your time limits? When you want your project to be completed? See my profile and reviews for further details. Regards Engineer Nouman

$250 USD 10일에

4.9

(15 건의 리뷰)

4.4

@Valuesolutions

Hello, i have read the details provided..please contact me to discuss more on the project deadline and some other few things

$250 USD 7일에

3.5

(22 건의 리뷰)

5.5

@vBhavin21

Hey there! 3+ years of experience with ESP32. 2+ years of experience with nRF51/52 2+ years of experience with LoRA 3+ years of experience with BLE/WiFi I have portfolio to share. Please reach me out for more details. I can assure you, your project will be in safe hands. Sincerely, Bhavin

$500 USD 30일에

5.0

(3 건의 리뷰)

3.3

@athminteam

Hi, This is Vipin, an alumnus of IIT Kanpur. I have 6+ years of experience in customized software, web and mobile app development and has expertise in Android, iOS, Python, Magento, PHP, HTML, Java, Angular and Ionic framework. I would like to work on your project and looking for long term work. Kindly connect to discuss in detail and check my recent work in portfolio section as well. Hope to talk more soon Thanks

$500 USD 7일에

4.2

(4 건의 리뷰)

2.4

@drishinfotech

Hi, I would like to know in detail about your project requirements so that I can have an understanding of your project. Recently, I have completed one project "Tag-N-Track", which is based on serverless APIs like Azure, Azure Functions etc. which provides the services like Smart warehouse, Smart Transportation, Smart Retail & Smart Delivery etc. I have used BT832 module and for the development, I have used NRF52 DK. Here, We are receiving BLE packets using BT832 module and send that data to ESP. The developed system is that much smart that It provides the details of available goods/inventory in racks and also provide the live shipping status of products according to their shipping vehicle. I am available for the project discussion. It will be appreciable if you come online for discussion. Please feel free to ask, if you have any query or concern. I will be happy to assist you. Best Regards, Pankaj Jaswal

$450 USD 2일에

4.6

(2 건의 리뷰)

2.3

@JiangZhengHe

Hello. Thank you for the job posting As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 10+ years. Here are some of the experiences that I worked ago. - Schematic and PCB Layout using Altium designer, Cadence, Eagle, and so on. - SolidWorks Enclosure, AutoCad design - 3D Modelling - Matlab simulation - Multi Layer, Flexible, High speed PCB design - Exceptional C++/C /C# programming skills. - FPGA design using Verilog/VHDL (Xilinx ISE/XPS/SDK/Vivado, Altera Quartus, iCECube) - ARM, DSP, MCUs, Arduino experience. - Arm cores: ATSAM, STM32, PIC32, A13, FreeScale, MSP, NXP - MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251 - Single board computer: Raspbery pi, Beaglebone, NanoPi - Strong with UART, I2C, SPI, BLE,BT, GSM/GPRS/GPS, xBee, ZigBee. - Especially full experience for BLE HM10, HC05, ESP32, DA14580, nRF52832, 52840, BlueNRG, Once you hire me, expected me to help your business like I 'm growing it as my own. I would love to hear from you.

$250 USD 3일에

5.0

(1 건의 리뷰)

1.0

@ammaraunitech

Hello! I am very interested in your post project. I am really looking for this kind of project for a long time in freelancer since I have rich experience on it. I think this project is very suitable for me and I am sure I can give you a good result. If you award me for your project, you will get a good result. looking forward to work with you. Thank you Regard

$250 USD 7일에

0.0

(0 건의 리뷰)

0.0

@manojhiwarkar

Experience in 32-Bit ARM CORTEX-M SOCs : NORDIC NRF51422, 52832, MDBT42, BT43 Module, STM32. 16-bit: DSPIC33, IOT: Quectel M66, MC60, EC20. • Embedded C programming. • Have worked on Biomedical Devices & Sensors viz. Glucose monitoring, Body temperature sensors-MAX30205,LM75Heart rate sensors-MAX30102,Pedometer-MMA9555L, LIS3DH etc. • Communication protocols known: CAN, ISO-15765, USB, I2C, UART. • Able to interface I2C,SPI,UART communication protocol based sensors, RFID, LCD

$250 USD 3일에

0.0

(0 건의 리뷰)

0.0

@Sanlai

whatever your achievement now, it is not a small project I would like to learn something for the best of this stuff: 1/ what do you currently have (pcb, prototype, underway firmware, or only idea)? 2/ you describe carefully about the module itself, but nothing related to the UI. how do you intend to remotely observe the tracked info? mobile app, web server or any else? it therefore requires not only electronics and firmware development only but may be an app dev as well for the sake of process, those guys should work at the same place to synchronize the protocol of data. My team has enough members from pcb design, embedded firmware developer(MCU, sensor, peripheral controller, wireless module) and app dev (front end and back end)

$700 USD 40일에