Need Florida Engineer/Architect for Small Door Opening Reduction Project- Concrete Block/stucco framed home

$30-250 USD

종료됨

게시됨

1년 이상 전

$30-250 USD

제출할때 지불됩니다

The drawing will be submitted for a building permit in Palm Beach County, Florida. Florida Building Code requires the design professional of record to be licensed/registered in the state of Florida. Drawing must have a digital or stamped seal by design professional. Job is located in Palm Beach County.Florida- Palm Beach County. Site specific engineering which provides detail to reduce the height of 2 sliding glass door openings & install impact horizontal sliding windows. Existing width to remain as is. Existing headers to remain intact. The home has CBU stucco frame. Need to fill-in the openings with masonry walls at bottom of openings. Stucco the exterior & rough finish drywall on the interior. Opening #1 is in a kitchen- egress not required. Opening #2 is in a bedroom- egress required.

Building Architecture

Structural Engineering

Construction Engineering

프로젝트 ID: 35392470

프로젝트 정보

17 제안서

원격근무 프로젝트

활동 중 1년 전

돈을 좀 벌 생각이십니까?

이메일 주소

프리랜서 입찰의 이점

예산 및 기간 설정

작업 결과에 대한 급여 수급

제안의 개요를 자세히 쓰세요

무료로 프로젝트에 신청하고 입찰할 수 있습니다

17 이 프로젝트에 프리랜서들의 평균 입찰은 $102 USD입니다.

@androaiad

Hello, I an experienced structural engineer, I can provide the required calculations and design drawings in the required time. Please check my portfolio and reviews. Thanks.

$150 USD 2일에

4.9

(245 건의 리뷰)

7.9

@MohammedZamzam

Hello sir, I’ve read your project considering the need for an expert in structural engineering to help U with Small Door Opening Reduction Project- Concrete Block/stucco framed home I’m a civil engineer holding a master's degree and have more than 5 years of experience in the field, and of course, I can help finish the required task in the required time. (I’ve done more than 50 projects finished successfully _ U can Check my reviews) Similar project as yours can be provided, just kindly inbox me for further details. Regards, Mohammed Zamzam

$120 USD 2일에

5.0

(40 건의 리뷰)

6.1

@Ngocdeginer

Dear Client! How are you ? Hope you are doing well and thank you for posting this project. My pleasure to bid on your project and i am very interested in your project. I am a building architect and structural engineer with more than 7 years of experiences in the fields of residential and commercial projects. I am very familiar to many building codes such as American,British, Canadian, Australian and Euro codes. I have high skills in many software such as AutoCad, Autodesk Revit, Chief Architect, ArchiCad, Sketch up, 3ds Max, Lumion and etc. I am sure i can provide you the best results within your timeline. Thank you.

$50 USD 3일에

4.9

(16 건의 리뷰)

5.8

@lizzasadim

in 13 hours Greetings.. im interested....i can provide the detail drawings....please feel free to discuss it with me.......i am a PROFESSIONAL ARCHITECT and a CIVIL ENGINEER , with 25 years experience in the field of construction and designing...and currently into Freelancing Cad Business right in the comforts of my home. I have worked in various construction companies preparing DESIGN, CONSTRUCTION, SHOP, and AS-BUILT for various disciplines: Architectural, Structural, Civil, Mechanical, Electrical,Plumbing, FDAS, Auxillary, Interior Design and Fit-outs. In Presentation Drawings, I use only Sketchup + Vray for Exterior and Interior Perspectives. I hope i can get the chance to work with you in the future... Best Regards

$80 USD 2일에

4.6

(79 건의 리뷰)

6.3

@CONGBMT

⭐Dear Project Client⭐ i am a Pro structure engineer. i have many experience of steel & wooden framed structure and RC analysis & design. and structural Drawing. i am using Teckla, SAP2000, ETABS with your country standard. i am free now so i can start for you. Please contact with me to discuss more details of your project. Regard! Cong, thanks.

$30 USD 1일에

4.9

(13 건의 리뷰)

5.2

@umg536

Hi there, I'm bidding on your project "Need Structural Engineer for Small Door Opening Reduction Project" we are a team of titanium certified developers. we excel inAutoCAD and solidworks enviroment along with unity and unity 3D. please leave a message on my chat so we can discuss the budget and deadline of the project. Also, have a look at my profile for my reviews and portfolios. Thanks Note: This is not an automated bid and i'm ready to discuss your project right now. .. .

$250 USD 3일에

5.0

(3 건의 리뷰)

4.8

@KirillRomadanov1

Hello, my name is Kirill, I am a Structural engineer and architect by profession, I have a lot of knowledge of technology, I have a company with more than 5 years of experience in design, I invite you to see my catalog, write me to make an agreement that takes into account your economy, I guarantee that we will arrive at a very good product. thanks

$30 USD 1일에

4.7

(21 건의 리뷰)

5.2

@Sangvlog

Hello ? How are you ? Thank you for your posting project. I have read your project description carefully. I am very interested in your project. I am a structural engineer with experience of more than 7 years. I am expert in steel & wooden framed structure and RC analysis & design. I use ETABS & Sap2000 & Midas Gen for structural analysis and use Midas GTS NX for foundation & geological analysis. I am sure I can provide a good result in time. Best regard!

$30 USD 1일에

4.9

(6 건의 리뷰)

4.4

@Jarretdev

Hello! Your project perfect fit me. If you hire me I can start right away. I am a structural engineering expert and have 5 years of experience. My advantage is to keep the credit thoroughly and improve the quality of the assignments follow your suggestion. All clients who have worked with me want to work with me again. I hope lets discuss our project in detail. Thanks!

$120 USD 2일에

5.0

(1 건의 리뷰)

3.7

@YoussefTadros

Hi there, We are a group of expert engineers having 2 teaching assistants as well. We’ve done hundreds of similar projects so I am sure we will get your project done exactly as required. Please contact me to get a sample of our works. Thanks!

$140 USD 2일에

5.0

(4 건의 리뷰)

3.6

@jhonegrathful

❤️Dear Sir❤️ How are you? I am a Pro structure engineer. I have many experience of steel & wooden framed structure and RC analysis & design. and structural Drawing. I am using Teckla, SAP2000, ETABS with your country standard. I am free now so i can start for you. Please contact with me to discuss more details of your project. Regard!

$55 USD 7일에

5.0

(1 건의 리뷰)

1.8

@anwerzoro

Hello Sir, I have read your project details and reviewed the attachment carefully , I am Structural Engineer expert in (Analysis and Design of different buildings & BOQ & Shop drawing ) So I can prepare specific engineering details for reducing the height of glass door openings, and provide the required drawings in the required time. i am free now so i can start for you. Please contact with me to discuss more details of your project. Regards! Ahmed, thanks.

$100 USD 3일에

5.0

(3 건의 리뷰)

1.8

@Dasistsachin

Dear sir! I'm a 3Ds MAX/SketchUp/AutoCAD/Revit expert. I have a lot of experiences in professional 3D modeling/rendering by using 3Ds Max and Sketchup/Revit/AutoCAD. I checked your job carefully and I have a great interest in your project. I have many experiences in your project and can deliver perfect result within deadlines. You can confirm on my profile page If you hire me, then your project will be completed more successfully. I am waiting for good news. Best Regards Sachin kumar

$140 USD 7일에

5.0

(1 건의 리뷰)

1.2

@ArtaHovs84

Hi, I saw your project details. I am a 3D designer specializing in sketchup, revit, blender, 3d max and autocad. I use Sketchup, Levitt, and Autocad to design 2D and 3D buildings and interiors, and I use Blender, solidworks and 3D max to design 3D models for cars and toys, as well as various parts. With my skills, I can complete your project in at least 3 days without any inferiority. I hope you will discuss with me.

$140 USD 3일에

0.0

(0 건의 리뷰)

0.0

@marcuspov

Hi. I am very happy to bid your project I have just checked your attachments so I can help you perfectly. Please check my profile. https://www.freelancer.com/u/marcuspov I am a Professional Product Designer/3DModeler. I have a lot of experience working in AutoCAD/CAM/CAE, Sketchup, Autodesk Revit, Vectorworks,3Ds Max in the past. I am always respectful of my clients and try to figure out all issues about their project. Looking forward hearing from you. Thanks.

$100 USD 2일에