Arduino programming

완료 등록 시간: 5년 전 착불
완료 착불

Arduino project

This project involves editing a program for an Arduino UNO

We have a currently functioning program that operators two remote control car servos and a set of solenoid latches.

Current operation is as follows (short version)

When a signal is given, the Arduino outputs a signal to a relay. The relay in-turn activates 2 solenoid latches for a timed period. This unlocks the servos. The servos then retract (one clockwise and one counterclockwise) to a 90 degree position.

When the signal is removed, the servos rotate to their original position (no latching of solenoid)

I need to change is as follows:

The latching solenoid should work in both directions – latching when signal is on and also latching when signal is removed.

An additional relay will be added to remove power to the servos. They are overheating in their one position so I need to remove power when they hit their position.

The system will no work as follows:

Signal given: Power is applied to servos, Latch solenoids retract, servos move to 90 degree position, power is then removed

Signal removed: Power is applied to servos, Latch solenoids retract, servos move to 0 degree position, power is then removed

There may be up to 3 iterations of this program and minor adjustments will be necessary. As with the supplied program, I should be able to make adjustments to timing myself.

I will supply the base program so it only needs to be edited and also the relay for power be indication as to the hook up and installation instructions.

Arduino C 프로그래밍 전기 공학 전자 공학 마이크로콘트롤러

프로젝트 ID: #16716949

프로젝트 소개

27 건(제안서) 재택 근무형 프로젝트 서비스 이용 중: 5년 전

수상자:

floriansw6

Hello Sir, I have worked with Arduino, especially Uno, for many years and I have also worked with RC equipment a lot previously, which is why I think I am best suited for this task. It would be very kind if you provid 기타

$55 CAD (3일 이내)
(2건의 리뷰)
2.3

이 일자리에 대한 프리랜서 27 명의 평균 입찰가: $143

ahmedmohamed85

A proposal has not yet been provided

$211 CAD (3일 이내)
(276 리뷰)
7.5
vtlabs

Hello I've done a lot of code conversion, and code modification on arduino based operating systems lately, of particular note was an op system for a washing machine on Guru. I can help you make your changes insid 기타

$155 CAD (3일 이내)
(45 리뷰)
6.3
ircrashed

Hello I have got your job posting “Arduino programming” and I am very much interested to work in your project. I am a circuit designer and have more than 5 years experience of working with the Analog/Digital Ele 기타

$150 CAD (5일 이내)
(58 리뷰)
5.9
urbito

Hello there! Hope you doing good! If you still need this to be done, be sure to contact me. Lets make something awesome! Greetings!

$250 CAD (21일 이내)
(35 리뷰)
5.4
scribblerspk

Hi, I have 16 years of design and development experience in the field of Embedded systems, I am confident that I can edit your UNO program. About my previous work you can see my clients reviews and the projects 기타

$222 CAD (10일 이내)
(12 리뷰)
5.5
carloslega

Hello... I am Carlos... Computer Science Engineer with about 20 years of experience in software projects with microcontrollers (C, C++, Assembler in PICs, ATMEL, STM32 and Arduino), Windows PC software (C, C++, Qt) and 기타

$211 CAD (7일 이내)
(2 리뷰)
4.9
rishiajmera

Hello, Greetings! With a proven track record of successful achievements, I am pleased to present my application for your consideration as a Freelancer. Please have a look at my profile and portfolio to get an idea a 기타

$155 CAD (3일 이내)
(16 리뷰)
4.5
bogdan2451629

Hello. Your task sounds not very complicated but need to have a look for all details too be sure that things are doing fine. Lets talk details and start project. My expeirience with Arduino more then 4 years.

$200 CAD (3일 이내)
(13 리뷰)
4.1
soltracker

How r u?Buddy...I did operation based on android, bluetooth, esp and with IR and RF modules. U will feel brotherhood...............................

$80 CAD (3일 이내)
(32 리뷰)
4.1
grtdeveloper

Rich experience of driving relays , motors (stepper , dc) using Arduino uno board with coding done primarily in c.

$177 CAD (3일 이내)
(4 리뷰)
3.7
kamalHMoustafa

A proposal has not yet been provided

$75 CAD (4일 이내)
(4 리뷰)
3.7
marisaramesh

Good at Arduino Uno programming and knowledge on Relays & solenoids. I can do modifications to your code and also adjust timing as requirements. Hope discussion on project in details. Thanks

$200 CAD (3일 이내)
(2 리뷰)
3.1
wbadry

Hello, I carefully read the modification needed for adding an extra relay to control power sourced to servo which is rational although timing may need to be adjusted since relay latch should take time before motion sta 기타

$100 CAD (3일 이내)
(2 리뷰)
2.6
NazarPak

A proposal has not yet been provided

$222 CAD (3일 이내)
(3 리뷰)
2.0
engjosiah

Hi Sir, i will add the new functions, that add the 3rd relay, power of servos when they hit their positions, and latch solenoids wen there signal or no, and rotate servos clockwise and anti-clockwise

$155 CAD (3일 이내)
(1 리뷰)
2.2
BELFOUL

Hi, I'm an elictrical engineer. I'm familiar with arduino, I realased a lot of projects with arduino . I'm really interested in your project, I'm available and effictive and you can count on me to edit your code and 기타

$80 CAD (2일 이내)
(0 리뷰)
0.0
pedrotpm

A proposal has not yet been provided

$30 CAD (2일 이내)
(0 리뷰)
0.0
Hanish70

I had done so many projects on arduino and can solve your problem if you give me a chance.

$30 CAD (2일 이내)
(0 리뷰)
0.0
jawadsi007

Experience in software and app development makes me a suitable candidate for this project, however, my skills and experience in Arduino IDE development will provide an edge over other candidates. I can design the appli 기타

$222 CAD (3일 이내)
(0 리뷰)
0.0
rudynurhadi

Hi, I am new to freelancer and looking for some experience and extra money. I have an experience with arduino, servo, and solenoid as I used to build robot. You can see my instagram page @rudynurhadi and some of my wor 기타

$30 CAD (2일 이내)
(0 리뷰)
0.0