완료

digital signal processing project

I want these problems of DSP to be solved for a meeting.

1.2 Tests to be carried out

1.2.1 Implementation of an adaptive filter

Implement an adaptive filter as shown in Figure 1.1 using the update equation 1.18 as a Matlab function. Pass the following arguments to the function: input signal x(n), desired signal d(n), filter length L and the step size parameter (ALPHArel) as relative size to the maximum stable step size according to calibration 1.33 The function shall calculate and return the following sizes: Error signal e(n), output signal y(n), time sequence of the set filter coefficients fn ( Attention: Represents a matrix)

1.2.2 Checking the Implementation: Notch-Filter

to check the self written function use the sum of a white noise and a sine tone at 1KHz as input signal x(n). As desired signal d(n) use the identical noise as in x(n), but without the sine tone. In total, the signal should be about 1s long (about 10,000 samples, depending on the selected sampling rate). Adapt the adaptive filter with this signal for different relstive step sizes (ALPHArel) between 0.1 and 1 and a filter length of L= 100 and document the instantaneous power of the noise e(n)^2 as a function of time to check the convergence. Further document the transfer function of the adaptive filter (to be calculated from the filter coefficient f(n) after convergence of the adaptive filter). Since in this circuit the input signal contains a sine tone that the desired signal does not contain, the adaptive filter should attenuate this frequency to equalize both signals. At all other frequencies, however, the two signals are identical, i.e. the filter should leave all other frequencies unchanged in order to equalize both signals. The result is a filter that attenuates exactly one frequency and leaves the rest unchanged, a so-called notch filter.

1.2.3 System detection

Connect the daptive filter as shown in Figure 1.2. Use an IIR low pass filter as the system to be detected (e.g. the design from the first week of the internship) and white noise as the input signal x(n). Let the adaptive filter adapt with a relative increment (ALPHArel) of about 0.8 and document the filter coefficients f(n) after convergence of the adaptive filter. Compare the transfer function of the system to be detected (the poles of the system function of the IIR filter are known) and of the adaptive filter by magnitude and phase.

1.2.4 Noise suppression

Use the same structure as for system detection and, in addition to the desired signal d(n), a speech signal u(n). After adaptation of the adaptive filter, the error signal e(n) should only contain the speech signal. Listen to the error signal and describe the hearing impression. If it meets the expectation

기술: 전기 공학, 전자 공학, 공학, MATLAB/Mathematica, Python

확대 보기: multisim audio signal processing project help, digital image processing project vb6, digital signal processing verilog, digital signal processing artificial intelligence, freelance digital signal processing, digital signal processing companies coimbatore, digital image processing project java, digital signal processing viva questions, questions digital signal processing, cuda digital signal processing, digital signal processing freelancer, digital signal processing analysis, digital signal processing tutor, digital signal processing hearing aid project docx, matlab digital image processing project code, digital signal processing expert required

고용주 소개:
( 63건의 리뷰 ) ifako ijaiye, Nigeria

프로젝트 ID: #21694577

수상자:

Arifwaqas756

Hello sir i am very keen to work on this project as it covers my line of work mostly related to digital signal processing in Matlab i have done plenty of projects on filter design whether fir or iir..

$50 AUD (4일 이내)
(0건의 리뷰)
0.0

이 프로젝트의 입찰 현황은 다음과 같습니다. 입찰자: 4명, 평균 입찰가: $175

zainpacc

Expertise in MATLAB and DSP with 7 years of academic, industrial and freelancing experience in this field I have completed various protects related this field as you can view my profile for completed projects. I can p 더 보기

$150 AUD (7일 이내)
(81 리뷰)
5.2
victoryfive1990

Hello. Fast and accurate result will be delivered on time. I am experienced working with the project as you suggest and I think I can complete your work on time. Now I am fully avaliable for your project and for your t 더 보기

$300 AUD (7일 이내)
(3 리뷰)
1.3
Ahmed8033

Hi, i am electronics engineer and have experience with Matlab, inbox me.

$200 AUD (7일 이내)
(1 리뷰)
0.3