Find Jobs
Hire Freelancers

Electronic Device for measuring Temperature

$750-1500 CAD

종료됨
게시됨 5년 이상 전

$750-1500 CAD

제출할때 지불됩니다
I need a device to connect 6 Thermistors and measure temperature, Device to work on -30C degree to +70 so all Electrical component should be suitable for this range temperature, We will take care of enclosure and sensor connection. Data to be transmitted to the server shows in graph, every 10 to 15 min interval. Need a mechanism to monitor the temperature instantly if we need, to pull data. Device should work on Battery for at least 2 weeks.
프로젝트 ID: 17372491

프로젝트 정보

36 제안서
원격근무 프로젝트
활동 중 6년 전

돈을 좀 벌 생각이십니까?

프리랜서 입찰의 이점

예산 및 기간 설정
작업 결과에 대한 급여 수급
제안의 개요를 자세히 쓰세요
무료로 프로젝트에 신청하고 입찰할 수 있습니다
36 이 프로젝트에 프리랜서들의 평균 입찰은 $1,116 CAD입니다.
사용자 아바타
HI I am experienced embedded system designer with more than 9 years of experience. I would like to discuss more about the details. Please get in touch to discuss it further. Relevant Skills and Experience I have experience in working with thermisters. Please get in touch to discuss it further Regards Proposed Milestones $500 CAD - Milestone 1 $1000 CAD - Milestone 2
$1,500 CAD 20일에
4.9 (238 건의 리뷰)
7.9
7.9
사용자 아바타
We can do this project. we have developed lot of slimier projects :) we will use a dsPIc Micro controller and ESP wifi module to send the data to the server over the wifi Relevant Skills and Experience We have done similer data loggers for industrial application before. we have over 10 years experience in Software development and electronics Proposed Milestones $1500 CAD - Lets talk about milestones Do you want us to develop the server side code for this as well or just need the hardware and firmware ? lets talk on chat :)
$1,500 CAD 20일에
4.9 (42 건의 리뷰)
6.7
6.7
사용자 아바타
Hello I have experience in developing circuits. I will get your idea and will deliver you complete working project including circuit, schematic, working PCB, code and Android app if required. Thanks Relevant Skills and Experience BLE Electronics Microcontroller Programming Android Proposed Milestones $2000 CAD - Deliver the complete working project.
$2,000 CAD 20일에
4.7 (54 건의 리뷰)
6.7
6.7
사용자 아바타
Hi, I hope you are doing well. I have understood your project requirement which is remote temperature monitoring system. Relevant Skills and Experience I have developed similar project, I can use wifi or gsm to connect the system to server. Data can be logged also inquired. I will use MQTT protocol Proposed Milestones $1250 CAD - Project Please send me message for further discussion,
$1,250 CAD 20일에
4.9 (45 건의 리뷰)
6.4
6.4
사용자 아바타
Hello Sir, We have previous experiance in temperature sensing modules and medical Incubators.. Please contact us for more details. Best Regards, Lasantha Prasad Relevant Skills and Experience Electronic Proposed Milestones $1250 CAD - Developments
$1,250 CAD 45일에
4.8 (22 건의 리뷰)
6.6
6.6
사용자 아바타
Expertise in analog and digital electronics with five years of academic as well as industrial experience in this field. I have completed various projects related to this as you can view my profile for reviews. I can provide you your complete task in decided time frame with quality work. We can discuss further details in the message box Regards
$750 CAD 5일에
4.9 (72 건의 리뷰)
5.3
5.3
사용자 아바타
Thermistors will be required to test and measure temperature and sgnal conditioning of their responses. Data transmitted to the server will be shown in graph for every 10 to 15 min interval. Relevant Skills and Experience I am a professional Electronics Engineer having expertise in MEASURING TEMPERATURE from temperature sensors. Proposed Milestones $750 CAD - Full project
$750 CAD 10일에
4.7 (16 건의 리뷰)
5.0
5.0
사용자 아바타
I can do your job.
$833 CAD 20일에
4.8 (6 건의 리뷰)
4.6
4.6
사용자 아바타
I suggest using module with ESP8266 that has the versatility to get analog data and wifi, it is also small in size and of low consumption to be used by a small battery. Relevant Skills and Experience I have several years of experience in IOT data management. I have created several projects to capture data and take them to the web using servers such as losant, thingspeak among others. Proposed Milestones $750 CAD - Design schematics and esp8266 code
$750 CAD 20일에
5.0 (8 건의 리뷰)
4.0
4.0
사용자 아바타
Dear, I am a professional Mechatronics engineer with +4 years of experience, I can help you out with all of your project I have made multiple projects that are very similar to this project, for an example I have made a control PID system for the temperature of a metallic furnace Please contact me ASAP se we can negotiate the project details, deadlines and finances Best regards
$750 CAD 1일에
4.4 (12 건의 리뷰)
4.3
4.3
사용자 아바타
We will discuss with you the specifications for the project, discuss about the available connectivity options and decide on a comprehensive solution. Relevant Skills and Experience We have extensive experience in design of sensor nodes with embedded connectivity. Proposed Milestones $177 CAD - Specifications $600 CAD - Design $223 CAD - Review and Completion Additional Services Offered $500 CAD - Prototype
$1,000 CAD 20일에
5.0 (4 건의 리뷰)
3.8
3.8
사용자 아바타
Hello sir suitable sensor for that is DS18B20 it's range is -50 to 150 Celsius . I can start work on it with many types of method Relevant Skills and Experience IOT Project builder Electrical circuit hardware design Proposed Milestones $888 CAD - coding $300 CAD - prototype and test I have proficiency in following software tools: Electrical circuit design Arduino IDE pcb design microcontroller programming ,interface plc programming scada system design Siemens S7 programming Electrical circuit simulation thermal control system building circuit (low energy control) bluetooth NodeMCU programming IOT (internet of things) Mplab(x) IDE micro C IDE PCB manufacturing
$888 CAD 20일에
3.3 (10 건의 리뷰)
4.8
4.8
사용자 아바타
Hi, I suggest an Arduino system for your application. There are 6 analog inputs available to measure temperature and a sleep mode can be used for a longer battery life. I can give you advise for the right components and deliver the Arduino program. greetings Tobie
$750 CAD 10일에
5.0 (6 건의 리뷰)
3.0
3.0
사용자 아바타
Sir please ping me to discuss the details, i have some sample projects to show also i do not charge anything if you are not satisfied with my work Relevant Skills and Experience PCB designing C/C++ Controllers Embedded developer Proposed Milestones $1250 CAD - Research and designing
$1,250 CAD 20일에
3.9 (18 건의 리뷰)
3.3
3.3
사용자 아바타
Hello, To do the provided work we can fix temperature sensors and esp8266 which will send the data to the server and using that data we can in plot graph in a web app. Relevant Skills and Experience I have already done this type of work , I have created Home Automation System In which I have to provide similar functionality of ploting graph in android app. Proposed Milestones $150 CAD - For purchasing sensors $50 CAD - purchasing domin and hosting $200 CAD - After configuring sensors which will send data to server $200 CAD - after completing webapp $377 CAD - after delivery Additional Services Offered $100 CAD - responsive web design
$777 CAD 20일에
5.0 (1 건의 리뷰)
1.7
1.7
사용자 아바타
Hi good morning i'm a phycisist engineer and biomedical engineer so i do know how to workwith all this instrumentation.I have been working in a lab more than 3 years and i mastered the PCB design and the electronics optimization.I can do really build this instrumentation with Cheapest and most efficient structure. I hope we can work together and if you have any doubt please let me know it.Regards.
$750 CAD 10일에
3.8 (1 건의 리뷰)
1.2
1.2
사용자 아바타
You could use DS18x20 sensor integrated with arduino board. This sensor can stand upto -55 degree so I think this would be matched with your requirement Relevant Skills and Experience I am working on many arduino projects which involve the measurement stuff. Proposed Milestones $1000 CAD - Milestones Let me know the detail of measurement, connectvity, etc you want
$1,000 CAD 20일에
0.0 (1 건의 리뷰)
0.0
0.0
사용자 아바타
I can do it in 7 days..... I will use arduino microcontroller which operate and perform all your requirements....
$888 CAD 7일에
0.0 (0 건의 리뷰)
0.0
0.0
사용자 아바타
Hello! I am in Canada and can do this project over a ten day period. I would build it using a Photon IO (wifi or cellular) IOT device. If you require PCBs it would take longer. Best Daniel Relevant Skills and Experience I have around twenty years experience in designing and fabricating analog and digital electronics. An example is in my profile picture; I can send others if you like. Proposed Milestones $800 CAD - Presntation of working prototype device to client $422 CAD - Revision, if necesary, delivery of final device to client Additional Services Offered $250 CAD - Custom PCB design and fabrication (adds about 10 days)
$1,222 CAD 10일에
0.0 (0 건의 리뷰)
0.0
0.0
사용자 아바타
1)The circuit needed to interface six thermistors to microcontroller have to designed . 2)The voltage of six thermistor have to be converted to temperature in microcontroller firmware and displayed. Relevant Skills and Experience I have been working for couple of years in electronics design and firmware.I have experience in Embedded C,Arduino,STM32 and python ( for GUI software). Proposed Milestones $500 CAD - Before accepting the awarded project. $750 CAD - After the project has been completed.
$1,250 CAD 40일에
0.0 (0 건의 리뷰)
0.0
0.0

고객에 대한 정보

국기 (CANADA)
Canada
0.0
0
7월 16, 2018부터 회원입니다

고객 확인

감사합니다! 무료 크레딧을 신청할 수 있는 링크를 이메일로 보내드렸습니다.
이메일을 보내는 동안 문제가 발생했습니다. 다시 시도해 주세요.
등록 사용자 전체 등록 건수(일자리)
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
미리 보기 화면을 준비 중...
위치 정보 관련 접근권이 허용되었습니다.
고객님의 로그인 세션이 만료되어, 자동으로 로그아웃 처리가 되었습니다. 다시 로그인하여 주십시오.