Find Jobs
Hire Freelancers

Simulation design of MPPT code compilation and photovoltaic conversion(train station)1

£250-750 GBP

종료됨
게시됨 4년 이상 전

£250-750 GBP

제출할때 지불됩니다
What I want is a simulation(proteus, matlab). It can be divided in to 3 part or more. 1: Solar energy is converted into electrical energy to supply large battery energy storage devices then supplying 230V AC 2: Substation's electrical energy converted to 230V AC 3: compile code by using a microcomputer like Arduino Programming software(MPPT method=Perturb or observe or Incremental conductance or Current sweep or Constant voltage) to maximum the power in 1 This design is about the solar train station. Therefore, the selection of photovoltaic panels, batteries and various types of equipment should also be based on a certain railway station in the world.(u should tell me which station and parameter before u begin to do it ) This is just a project, so you don't have to think too complicated, such as paying attention to the lighting angle, whether the solar panel needs to follow the lighting, etc. The photovoltaic panel is like being fixed on the roof. Various types of buck or boost circuits need to be designed instead of dragging a module directly. Last, finish it asap(1week or 2 week). After you gave me this simulation, the project is not over yet. In the next month or up to 2 months, I may also ask you to make a small change.
프로젝트 ID: 20352570

프로젝트 정보

17 제안서
원격근무 프로젝트
활동 중 5년 전

돈을 좀 벌 생각이십니까?

프리랜서 입찰의 이점

예산 및 기간 설정
작업 결과에 대한 급여 수급
제안의 개요를 자세히 쓰세요
무료로 프로젝트에 신청하고 입찰할 수 있습니다
17 이 프로젝트에 프리랜서들의 평균 입찰은 £574 GBP입니다.
사용자 아바타
Please contact me for further discussion. Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in SMPS, supplies design from few watts to KW range using Buck, Boost, Buck -boost, Push Pull and H-bridge inverters I am excellent in solar, wind, Micro grid, smart grid and IEEE bus systems development in MATLAB Simulink Design, PSPICE, PSIM ,MULTISIM and LTSpice , Proteus Simulations. I did many projects for MS and PhD thesis like grid connected solar, wind, wave energy grid connected systems using MPPT, Multi-level converters, Inverters with different control algorithms, hybrid systems development and D-STATCOMs, FACTS devices for power stability, quality and control electrical vehicles, inductor motors. I worked for vehicle design simulation for different applications. I use to design Solar with MPPT using buck, buck-boost topologies, Power quality and control using Active filters, Opamp based circuit, digital circuits etc. I understand your requirement and ready to work for you. Please contact me for further discussion.
£1,000 GBP 30일에
4.9 (64 건의 리뷰)
6.8
6.8
사용자 아바타
Hello I am interested from your project. I have done similar projects before so I have ability to make your project too.
£500 GBP 7일에
4.9 (64 건의 리뷰)
5.8
5.8
사용자 아바타
I have well experienced in doing such kind of jobs....................................................................
£250 GBP 7일에
4.9 (55 건의 리뷰)
5.8
5.8
사용자 아바타
Please attach full details Professional engineer with 40 years of experience in academic support ...........................I am using MATLAB version 2018b
£450 GBP 15일에
4.4 (105 건의 리뷰)
6.2
6.2
사용자 아바타
Hello, I have gone through your job posting and become very much interested to work with you. I am an expert in this field. I have already completed several projects like this. For evidence you can see my profile. Please visit : https://www.freelancer.com/u/schoudhary1553 I have excellent command over English. I am a hard worker, productive and worthy of your attention I hope, I would be the right candidate for this post. Awaiting an affirmative response from you. Kinds Regards, Sandeep
£500 GBP 7일에
5.0 (23 건의 리뷰)
5.2
5.2
사용자 아바타
Hi, I have checked project requirements and divided into following tasks: 1) Simulation of Solar Power System 2)Simulation of Storage Batteries 3) Buck Boost convertor Design 4) Inversion of the Stored power to 230V Question: Can I chose a power station near me for the specified task. I shall be waiting for your response. I am also willing for the changes in the design after 2 months as you required. Regards Engineer Nouman
£1,000 GBP 15일에
4.7 (30 건의 리뷰)
5.5
5.5
사용자 아바타
Hello there! You're in the right place for your ELECTRONIC project. I graduated as an electronic student from one of the prestigious universities in West Africa. I have assisted several individuals with their PCB related project, with main expertise on Orcad, Altium, and Eagle, with outstanding outcomes. As a researcher and also a prolific writer, combining these skills help me to meet my clients' project milestones. I promise to provide a continuous guide for my client at any time of the day. Kindly send me a message to take this project further. I anticipate a favorable response from you. Ayo
£250 GBP 7일에
4.8 (12 건의 리뷰)
4.9
4.9
사용자 아바타
~~~~ Welcome to my profile ~~~~ I read your project carefully. Your project is very fit to my skills. You can check my Engineering and Matlab & Simulink skills from my profile. Let's discuss more details in the chat box. I will definitely help you. Thanks.
£500 GBP 7일에
5.0 (9 건의 리뷰)
4.2
4.2
사용자 아바타
Expert in Matlab, Simulink, Power System, Signal Processing, Image Processing Artificial Intelligence. Excellent in Electrical Engg. Algorithms development, Power system, power electronics & drives. PV generation, Wind generation, Hybrid, MPPT, PSO, ACO, ABC, MPC, BFO, Game Theory etc Already finished similar work. I can do this work. Pls send a msg to discuss further. I can give you in 10 days.
£500 GBP 7일에
4.9 (19 건의 리뷰)
4.4
4.4
사용자 아바타
Hello Sir I am a Mechatronics engineer and I have a lot of experience dealing with these things. I will definitely deliver your work on time. I will do it in a reasonable amount. I will be pleased to do your project. Thank you
£250 GBP 3일에
5.0 (13 건의 리뷰)
4.0
4.0
사용자 아바타
I am an electrical engineer, MSC in applied mathematics, PHD. Control and automation. I can do, improve any proposal made by another, with a mutual agreement, with all the details that you need, within my proposal, I can offer you additional extras. We can discuss the details of your needs in the chat. I have already done this type of project for this application the matlab, Digsilent, labview, and others. I'm interested in your project Atte. ING. Luis Moreno
£750 GBP 10일에
5.0 (2 건의 리뷰)
0.6
0.6
사용자 아바타
Hello, How are you? Your project is very suitable to me. I'm a senior IT dev and have high ranking in this platform. If you check my profile, you can see my skills and abilities on this area. I'm sure that I can provide you good result you want,. Hope to discuss more details in chat. Best Regards Peng
£500 GBP 7일에
0.0 (0 건의 리뷰)
0.0
0.0
사용자 아바타
Hi, I'm a mechanical engineer with high background in software programming. My thesis was about "optimization of an integrated system with solar panels, wind turbines, inverters and, battery-package in a remote area" that I've done it with Matlab and optimized it with the genetic algorithm. Recently I made a solar tracker, and I have the experience to program Arduino also. So, I have experience in all areas that you need, and I can do a free optimization of that attached cycle for you. Contact me if you want to see my mentioned projects. Regards.
£500 GBP 10일에
0.0 (0 건의 리뷰)
0.0
0.0
사용자 아바타
hello I have already worked on MPPT.. this project can be easily done. nothing to worry.. u can also think for MPPT with partial shading.. I can do this project. kindly consider.
£500 GBP 14일에
0.0 (0 건의 리뷰)
0.0
0.0

고객에 대한 정보

국기 (UNITED KINGDOM)
Chatham, United Kingdom
5.0
14
결제 수단 확인
11월 28, 2017부터 회원입니다

고객 확인

감사합니다! 무료 크레딧을 신청할 수 있는 링크를 이메일로 보내드렸습니다.
이메일을 보내는 동안 문제가 발생했습니다. 다시 시도해 주세요.
등록 사용자 전체 등록 건수(일자리)
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
미리 보기 화면을 준비 중...
위치 정보 관련 접근권이 허용되었습니다.
고객님의 로그인 세션이 만료되어, 자동으로 로그아웃 처리가 되었습니다. 다시 로그인하여 주십시오.