취소 완료

Work on existing STM code and do some additions

I need someone who is well versed with STM32F4 series. I have to program a custom made PCB with an on board STM32F407VGT6 (100 pin package), the details of which will be discussed in personal chat with bidders. A similar type of PCB was programmed before this by my superior so some of the modules are already ready, and 2 others need to be programmed.

For example: The ADC needs to work in simultaneous mode, which is already programmed (might need some editing) and a DAC and one more module with SPI interface needs to be coded completely from scratch.

****************** Information for bidders*************************************

****************** Please only bid if you agree to all of the points below*******

Time constraint: The PCB is getting ready (will be printed, soldered and ready by 20th July. You can begin with the code today, tomorrow, whenever you want, but the testing will only be possible after 20th. And all the coding, testing, troubleshooting has to be completed by the end of July. The sooner the better.

Money: You can bid based on the budget but I have some experiences with freelancers who refused to start working without an advance and after paying around 200 euros, were not able to finish the tasks. So please don't expect an advance payment. Your code is of no use to me if you leave it unfinished. Ofcourse, if we determine if there is some problem with the hardware or PCB, then you are not responsible. And of course I will make milestones for your security.

Software: You can use whatever you want, but I will be using IAR + cubemx.

Access: I am willing to give you remote access to my laptop for 3-4+ hours a day so that I can easily understand what you are doing. (Its completely optional). You can also do this in the testing phase. It will make things easier for both of us.

Code quality: I don't care if the code is newbie level or efficient, as long as it works.

Bonus 1: You get a 100 euro bonus on top of your bid if you finish the work and I have a fully functional device by the end of July.

Bonus 2: You get a chance to change your bid after I show you the circuit and give you all the details as I can't upload it here and I'm aware of the fact that its difficult to get an idea about the amount of work and time that needs to be put in without knowing the details.

Preference: I usually prefer new freelancers as they charge less but this time I'm not concerned about the money, I NEED THIS WORK DONE IN ANY CASE.

Advantages: Consider this a test product, if I like your way of working and I find you reliable and professional, I will give you more projects in future. I have at least 1 new thing to outsource every month.

REMEMBER THAT YOU ARE ONLY CODING DAC AND SPI. EVERYTHING ELSE IS JUST AN ASSEMBLY JOB WHERE THE CODE IS READY AND YOU HAVE TO DO MINOR CHANGES (FOR EXAMPLE PIN NUMBERS, ETC). DON'T OVERBID.

기술: 전자 공학, 마이크로콘트롤러, 전기 공학, Embedded Systems, C 프로그래밍

확대 보기: convert existing html code joomla article, modify existing data code, convert existing php code drupal, worldpay work existing cart, add mfc display existing mfc code, free lancing work proof reading copy writing india school level, recaptcha work existing email form, work existing templates, existing php code integration drupal, corecommerce work existing website, integration existing ios code real project, admob existing wrapper code, work existing plugin minecraft, migrating existing php code framework, additional work existing ios app, simple update existing delphi code, work existing template jsp, work order source code net, additional work existing fusionpbx, work existing website

고용주 소개:
( 0건의 리뷰 ) Chemnitz, Germany

프로젝트 ID: #20298386

이 프로젝트의 입찰 현황은 다음과 같습니다. 입찰자: 15명, 평균 입찰가: €222

ahmad5857

Hi Sir, We are expert in stm32 based mcu of all series, we can make you working and efficient firmware for your board. Lets talk to us on it. We are professional engineers and developers who do such projects from the 더 보기

€300 EUR (7일 이내)
(41 리뷰)
6.6
amelectronics

Hello sir, I have experience in designing electronics circuits and can develop hardware compatible smartphone and PC based apps. I also have done a lot of IoT projects and can transform your idea into a fully working p 더 보기

€400 EUR (15일 이내)
(37 리뷰)
6.5
dslc

I use STM32CubeMX and Atollic Truestudio for my development with STM32 devices - as I can not run IAR on a Linux operating system. I do not think that would be a show-stopper but just wanted to let you know in advance. 더 보기

€165 EUR (18일 이내)
(5 리뷰)
5.8
bulgar

Dear Sir, We are a small R & D company, based in Bulgaria, Europe. We work exclusively with U.S. partners. We specialize in developing Embed systems based ST(STM32), Microchip (Atmel )(PICs,AVR,Atmel ARM) and TI (MSP43 더 보기

€510 EUR (15일 이내)
(11 리뷰)
5.5
TisteAndii

Hi, I'm an embedded software engineer with extensive STM32 experience. I understand you need some changes to your existing ADC code and also some new interfacing involving DAC and SPI peripherals. I can execute this 더 보기

€230 EUR (5일 이내)
(19 리뷰)
4.5
sinany1

Hello, I am an embedded systems engineer experienced in microcontrollers such as stm, pic, avr. my main specialty is stm32. I have developed many industrial systems with stm32. of course I have used DAC and SPI periphe 더 보기

€150 EUR (7일 이내)
(2 리뷰)
3.5
pyrohaz

I've worked with the STM32 series of microcontrollers for 5+ years from L0 to F7, including F4. I'm quite knowledgeable with all STM32 peripherals and have done ADC to DAC comms through DMA with some DSP in the middle. 더 보기

€144 EUR (5일 이내)
(1 리뷰)
2.5
huyquangnguyen

I am an experience about embedded programming with IAR on STM32 MCU. Not only me but I have a team working on it about SPI, UART, I2C, I2S, ADC/DAC.. So, please share circuit diagram, current source code and what is th 더 보기

€270 EUR (12일 이내)
(3 리뷰)
2.2
chanduk5

I am a experienced embedded engineer with good working expertise on the STM series micro controllers. Working knowledge on ADC, DAC and interfacing the SPI chip with the micro controller Looking forward to discuss m 더 보기

€166 EUR (10일 이내)
(1 리뷰)
0.8
kamranarain79

Hey I am working on stm32f4 for monitoring temperature, humidity as well as soil sensor (temperature and humidity are SPI and soil is Analog). after some calculation turn on or off solonoid attached with stm32f4 also w 더 보기

€140 EUR (7일 이내)
(0 리뷰)
0.0
lihashorskiy

Hi, I have experience with the stm32f405rgt6 and stm32f469i. I will help you write a quick code. I have available debugging boards f4, so I can start work immediately. Write me and we will discuss the algorithm and the 더 보기

€150 EUR (5일 이내)
(0 리뷰)
0.0
UcefH

Hi, I am interested in your offer, I have experience on development of embedded firmware especially for STM32 and MSP430 microcontrollers. I am new to the freelance world but I have many experiences in the industrial 더 보기

€140 EUR (12일 이내)
(0 리뷰)
0.0
leohigo93

I'm mechatronic engineer. I have an stm32f4 nucleo-64. I've worked in projects with triple adC simultáneos plus dac outputs. And different comm. protocols. Also i can help you with the PCB. Relevant Skills and Experie 더 보기

€166 EUR (5일 이내)
(0 리뷰)
0.0
pravinkane

We have 4 pulse years of experiences in embedded hardware and software. Hands on experience in various microcontrollers like PIC controller, Cypress, ESP8266, STM32 etc. charges variation depends on the scope of the pr 더 보기

€200 EUR (20일 이내)
(0 리뷰)
0.0
wesonwang1010

I have more than 20 years of experience in MCU, embedded system hardware and software development, and among them, I have been using STM32(F1XX,F4xx) for more than 9 years(2008~2017). I used this series of cpus to succ 더 보기

€200 EUR (7일 이내)
(0 리뷰)
0.0