Find Jobs
Hire Freelancers

Civil calculations for a concrete slab

min $50 AUD / hour

종료됨
게시됨 5년 이상 전

min $50 AUD / hour

A concrete slab with a 150mm bund requires civil engineering calculations. The loads are from two air compressors weight approximately 1500kg each, and one generator at approximately 3000kg.
프로젝트 ID: 17568535

프로젝트 정보

40 제안서
원격근무 프로젝트
활동 중 6년 전

돈을 좀 벌 생각이십니까?

프리랜서 입찰의 이점

예산 및 기간 설정
작업 결과에 대한 급여 수급
제안의 개요를 자세히 쓰세요
무료로 프로젝트에 신청하고 입찰할 수 있습니다
40 이 프로젝트에 프리랜서들의 평균 입찰은 $53 AUD입니다./시간
사용자 아바타
Hello I am Civil and Structural Engineer with more than 4 years experience with American Codes, and I can do your job perfectly and on time, I am available 24/7 to support you and your project. Relevant Skills and Experience I have done a lot of Complicated Projects and buildings using American and Euro Codes, please contact me to see my samples Attached are samples for Steel and concrete previous building designed and detailed by my Team, I have a team of Tekla professional users who worked on many projects, please contact me to discuss more about your project, Best Regards Mina Boushra Structural and Civil Design Engineer
$50 AUD 40일에
5.0 (99 건의 리뷰)
7.3
7.3
사용자 아바타
Hello dear, I am a M.Sc. structural engineer. I am expert in structural analysis and design. I knew your task and i will finish it in the required time. Just message me to check. Thanks
$50 AUD 30일에
4.7 (208 건의 리뷰)
7.3
7.3
사용자 아바타
hi i can help you i am a civil engineer and teaching assistant in national water research center i have experience in - structure - buildings design , - steel structure -Water Treatment - AutoCAD - steel structure - collection works (culverts,syphon - Architectural - Structural - Civil - Sheet Metal - fluid mechanics - hydraulics - help students in faculty of engineering - Steel Doors - Advanced Dynamic Blocks - sewage networks - water management , - water treatment plant - waste water treatment plant - GIS - Engineering Waterfall Project Management
$50 AUD 2일에
4.5 (103 건의 리뷰)
6.9
6.9
사용자 아바타
Hi SIR I happy with your project I think all have to remodel and after apply load analysis. all design follow ACI318,,U.S.,BS THANKS
$55 AUD 20일에
4.8 (67 건의 리뷰)
6.3
6.3
사용자 아바타
hi, I am professional structural engineer having much experience in compressor and generator works. Please contact with me and share details. Hope you will get proper quality of work from me. Thanks
$55 AUD 40일에
4.8 (99 건의 리뷰)
6.0
6.0
사용자 아바타
Hello Sir, I am Civil and Structural Engineer with more than 6 years experience with Eurocodes, US, Indian and Australian codes and British Standardss, and I can do your job perfectly and on time, I am available 24/7 to support you and your project. Hourly rate: 25AUD per hour Relevant Skills and Experience Have more than 6 years of experience in structural engineering I have done a lot of Complicated Projects and buildings using Eurocodes,CANADA, US, Indian and Australian codes and British Standardss, Highly experienced in site management, structural designing and detailing. Using STAAD PRO and CSC-FASTRAK for designing and tekla structures for detailing, My profilo shows samples of completed jobs designed and detailed by me, Please go through my profile. Kindly send the files and award the project to start my work as early as possibly . Thanks and regards, Jeemon vg Structural and Civil Design Engineer
$50 AUD 40일에
4.5 (42 건의 리뷰)
6.0
6.0
사용자 아바타
Hello dear, how are you. I'm structure engineer with very good experience of my field. I checked your project description and i can work on it and provide the structural calculations for the slab. I will do it according to your design code but let me know, you want to know the slab reinforcement, deflection, it's thickness good to support the loads or no?...etc You can check with me over chat o discuss some details about your project. Thanks in advance Regards, Mohamed
$50 AUD 40일에
4.8 (34 건의 리뷰)
5.4
5.4
사용자 아바타
Hi, sr. my name is Gustavo and I am a Structural Engineer with Civil Engineering degree. I checked your project description with the attached files. In Your case I will consider the 32MPa for concrete, I will design the slab above the compacted subgrade, so the 10mm compacted soil will help to hold the slab loads, but I think that 20mm should be better considering the deflection with the time. For the loads and design, I´m thinking initially to run a nonlinear analysis with the loads applied, plus the vibration impact that the machines will make under work situation. For example, it will be like your slab will hold earthquake impacts. The steel reinforcement will be thinking about the duration of the structure too, so I will use the covering for an industrial situation with soil and water contact. Of course, the reinforcement will hold the loads as well. After that, I can tell that my budget is due to my hourly rate, and for this project, I will take a week, it means 45 hours. Let me know if you have any doubts, and I´m hoping to work with this project, it will be a beautiful work. Thank you; Almir Gustavo RPOTEC
$65 AUD 45일에
4.9 (11 건의 리뷰)
4.9
4.9
사용자 아바타
I am a structural engineer by profession, of many years experience currently working in the aerospace industry in the field of structural design and analysis. I have recently successfully completed two projects through Freelancer related to civil structures, one dealing with structural steel joints to Eurocode 3, the 2nd dealing with Building wind loadings to Eurocode 1. I would consider myself an ideal candidate for the project you propose, and should you feel that my background and expertise is suited to your present requirements please get in touch to discuss further details related to your project. My kind regards Peter.
$55 AUD 35일에
4.9 (6 건의 리뷰)
4.4
4.4
사용자 아바타
Hello, This work require knowledge of Slab behavior under Area Load and sustaining it with appropriate reinforcement.. I am a Civil Engineer and have worked with Structural Consultant , can easily deliver your project as I have experience in various project like Group housing, Industrial , Commercial complexes, etc. I CAN START AT A LOWER PAY TO KICKSTART MY FL CAREER Can discuss more over chat Thanks
$50 AUD 40일에
4.6 (16 건의 리뷰)
4.1
4.1
사용자 아바타
I DID SUCH A TYPE OF PROJECTS OVER THE PAST. I AM SURE THIS PROJECT WILL BE COMPLETED WITHIN A DUE TIME.
$50 AUD 40일에
5.0 (5 건의 리뷰)
3.8
3.8
사용자 아바타
Hello dear I have experience in calculation and designing. I worked in many engineering project and accounted a lot of BOQ. I am an civil engineer and have master degree in infrastructure. I worked to concrete building and steel structure. Nice to meet you Thanks
$50 AUD 30일에
4.8 (9 건의 리뷰)
3.6
3.6
사용자 아바타
update : hourly rate can be less than 50$ ofcourse and also time can be discussed. hello Sir , I am structural engineer with 8 years experince in structural analysis and design for concrete and steel structures. I made many concrete foundation desing like tank foundation, equipment foundations and pump and air compressor foundations. I am working with different standard and codes for design like American standards and Euro codes and Indian standards and also Australian standards. I hope I can help you in your project and gain your trust and satisfaction. best regards Mostafa
$50 AUD 10일에
4.5 (13 건의 리뷰)
3.9
3.9
사용자 아바타
I am applying for this job to showcase my skills and ability when it comes to designing works more specifically when it comes to civil engineering works. I am currently employed as Project Supervisor of a Government Office here in the Philippines. I am in charge in supervising all projects under contracts. Checking and also preparing Variation Orders and Plan revisions based on the actual condition of the project. I hope you will consider my application for this project. Thank you.
$50 AUD 40일에
0.0 (0 건의 리뷰)
0.0
0.0
사용자 아바타
I have an extensive experience in a similar design. In case you need further clarifications, kindly let me know.
$50 AUD 30일에
0.0 (0 건의 리뷰)
0.0
0.0
사용자 아바타
Structural Designer with experience for design and analysis of RCC Relevant Skills and Experience 5 years working experience
$50 AUD 25일에
0.0 (0 건의 리뷰)
0.0
0.0
사용자 아바타
I'm capable of manual and computerized design and analysis of non-prestressed concrete elements according to ACI. Also I'm capable of analyses of seismic and wind effects on high buildings using dynamic and static analytical methods according to UBC and IBC codes. I have the ability to hold the structural section of any project from the layout phase until the detailing drawings as appropriate. I can easily design your concrete slab and I will give you the safest design with the lowest cost. I look forward to work with you.
$55 AUD 40일에
0.0 (0 건의 리뷰)
0.0
0.0
사용자 아바타
Structural design with FEA and reinforcement detail by Eurocode 2.
$50 AUD 3일에
0.0 (0 건의 리뷰)
0.0
0.0
사용자 아바타
Design ( sab2000 - robot - excell ) autocad Relevant Skills and Experience Worked in Tanks Administrative buildings Residential buildings Gymnasium building
$77 AUD 30일에
0.0 (0 건의 리뷰)
0.0
0.0
사용자 아바타
Working as a civil & structural designer at a Singaporean consulting firm. Daily duties include such as requirements.
$50 AUD 40일에
0.0 (0 건의 리뷰)
0.0
0.0

고객에 대한 정보

국기 (AUSTRALIA)
Australia
0.0
0
결제 수단 확인
8월 14, 2018부터 회원입니다

고객 확인

감사합니다! 무료 크레딧을 신청할 수 있는 링크를 이메일로 보내드렸습니다.
이메일을 보내는 동안 문제가 발생했습니다. 다시 시도해 주세요.
등록 사용자 전체 등록 건수(일자리)
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
미리 보기 화면을 준비 중...
위치 정보 관련 접근권이 허용되었습니다.
고객님의 로그인 세션이 만료되어, 자동으로 로그아웃 처리가 되었습니다. 다시 로그인하여 주십시오.