Find Jobs
Hire Freelancers

Mechanical analysis of component arm-bar weldment

$30-250 USD

완료함
게시됨 약 3년 전

$30-250 USD

제출할때 지불됩니다
We desing and manufacture equipments for material handling. we are optimizing one of our equipments. Will give you a 3D model of the component (solid works), materials, loads, and position of supports. You must calculate reactions, stress, and factor of safety. Possibly you may modify, or make again the model if it is needed for better results or facility. The image uploaded is similar, not is final. only for quotation.
프로젝트 ID: 29469108

프로젝트 정보

31 제안서
원격근무 프로젝트
활동 중 3년 전

돈을 좀 벌 생각이십니까?

프리랜서 입찰의 이점

예산 및 기간 설정
작업 결과에 대한 급여 수급
제안의 개요를 자세히 쓰세요
무료로 프로젝트에 신청하고 입찰할 수 있습니다
프로젝트를 수여된 사용자:
사용자 아바타
$0 USD 2일에
5.0 (1 건의 리뷰)
2.2
2.2
사용자 아바타
$0 USD 1일에
5.0 (8 건의 리뷰)
4.3
4.3
31 이 프로젝트에 프리랜서들의 평균 입찰은 $123 USD입니다.
사용자 아바타
I’m a mechanical engineer and I’m working with Solidworks since 2007. I have done many stress simulation using Solidworks. I’m using Solidworks 2016 and 2020. Thanks
$100 USD 1일에
5.0 (555 건의 리뷰)
8.4
8.4
사용자 아바타
Hi, I hope you are doing fine. I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I have a lot of experience in automotive, aerospace, biotechnology, computers, electronics, microelectromechanical systems, energy conversion, robotics and automation, and manufacturing. I am also expert in mechanical engineering softwares including Ansys, Fluent, Comsol, CATIA, Solidworks, Abaqus and Inventor. I'm interested in your project and I really like to do this finite element analysis . Please send me a message so that we can discuss more. Best regards.
$140 USD 7일에
4.8 (100 건의 리뷰)
7.5
7.5
사용자 아바타
“Hi ”. I'm a FEA expert, with over 5 years experience dealing with solidworks . When do you need this finished by? I understand, and I can get this for you quickly! Please see my profile I look forward to working on this project with you. “Thank you for taking the time to read my application” “Best regards,” Maher Jaffe
$50 USD 3일에
4.9 (87 건의 리뷰)
6.3
6.3
사용자 아바타
Hello I’m Mohamed saeed Mechanical engineer with high experience I have checked your job description and ready to help you in your project
$278 USD 2일에
4.6 (59 건의 리뷰)
6.6
6.6
사용자 아바타
Hi, Im a Mechanical Engineer and an expert in design works. I can provide a quality work with 100 % accuracy with all required project deliverables and related 3D solidwork files. Let the professionals deal with this. Thanks
$90 USD 2일에
4.9 (82 건의 리뷰)
6.2
6.2
사용자 아바타
Mechanical analysis of component arm-bar weldment Hi there, Professional Mechanical Engineers Team I will do analysis on your project according to your concepts and requirements. I would give high quality work and results. I’m professional mechanical engineer expert in CAD design, 3d modeling and industrial products with professional engineer team. I have gone thorough in your project description. My kit of software is Solidworks, Autocad, Siemens NX, MS Office, Keyshot, Autodesk Inventor, Ansys and MATLAB. I have worked on several similar projects. Kindly visit my portfolio to see my work. https://www.freelancer.pk/u/youhana167 I would give better design and solution for your project. I’m interested in your project. I'm full time freelancer to tackle your project because your sanctification and pleasure is my first priority. I’m waiting your message to discuss. Thanks!
$30 USD 7일에
4.8 (39 건의 리뷰)
5.2
5.2
사용자 아바타
Hello, Dear Employer. Greetings of the day, I have studied your project description & found it interesting. I have done many project-related engineering, 3D modeling, product designing, CFD & FEA simulation, design analysis, and manufacturing of sheet metal and structural assemblies. To brief about me: I am a mechanical design engineer by profession and graduate in mechanical engineering with 5+ years of professional experience. ✫✫Main Skill✫✫ ☑️Machine design & manufacturing ☑️3D modeling ☑️Mechanical Engineering ☑️Product design ☑️FEA & CFD Analysis ☑️Structural design & Analysis ☑️Reverse Engineering ☑️Concept Development ☑️MS Project management ☑️Project Development ✫Design Tool Skill✫ ☑️Solidworks ☑️ANSYS ☑️Fusion 360 ☑️CATIA ☑️PTC-CREO ☑️AUTOCAD ☑️SIEMENS Star CCM+ ☑️ANSA☑️Power mill ☑️INVENTOR ☑️MATLAB ☑️ANSYS ☑️COMSOL ☑️ABAQUS I have professional experience for these projects, and I am very confident in completing any project related to the engineering field. My bid is negotiable, and it depends on the required deliverable. Looking forward to hearing from you & feel free to contact me Thanks & regards
$50 USD 7일에
4.6 (37 건의 리뷰)
4.8
4.8
사용자 아바타
Hello! Hope you are doing good. You will get detailded calculate reactions, stress, and factor of safety. I’m a professional Mechanical Engineer with 3years of experience in PRODUCT DESIGN and SIMULATIONS (SOLIDWORKS, AUTOCAD, ANSYS, KEYSHOT) and other tools. Looking forward to having a discussion with you. Best regards Vishnu
$250 USD 3일에
4.8 (13 건의 리뷰)
4.8
4.8
사용자 아바타
Hi, my name is Ali Özcan ÇİÇEK. I am a mechanical engineer. I have been working mechanical design for 15 years. During this time I designed more than 85 machines, units or devices for garment, textile, agriculture, plastic recycling, HVAC, automobile sub-industry, durable consumer goods, packaging, transportation-transmission and industrial kitchen sectors. You can see some of them from my profile.
$140 USD 7일에
4.8 (5 건의 리뷰)
4.8
4.8
사용자 아바타
Dear Madam/Sir, I'm a mechanical design engineer. I'm interested in the mechanical analisys CAD task and I'm ready to collaborate. If you think I can help you, just let me know. Have a nice day! Best regards D. Tsonkov
$30 USD 1일에
5.0 (16 건의 리뷰)
4.2
4.2
사용자 아바타
Hello I am professional in Finite element analysis. I have modelled and designed material handling projects which you would find them in my portfolio I am a mechanical engineer Best regards
$45 USD 3일에
5.0 (6 건의 리뷰)
4.2
4.2
사용자 아바타
Hello Sir I am Mechanical Engineer, I Work here as a 3D modeler ,I will offer you the best quality for low cost and I have many projects that i have made before in this area you can take a look on my profile. Thanks
$140 USD 2일에
5.0 (8 건의 리뷰)
3.6
3.6
사용자 아바타
Hie, Your project looks interesting, I am working as a design and quality engineer in a fabrication company, I can design and get your work ready according to your convenience and within the deadline. I have been working on both AutoCAD and Solidworks since Dec 2018 and have a free hand in Solidworks, 3D designing, simulation, and analysis of both motion and load, if your need to get just a 2D design structure I can do that for you using my AutoCad skills. (THE BIDDEN MOUNT IS NEGOTIABLE) I am 20hrs online a day so no issue might come during making any contact, just make a text to me and we will be discussing your project within a minute. For any kind of details, you can contact me either by mail or by a call. Regards Akshit Kumar (+919872909082)
$97 USD 4일에
5.0 (2 건의 리뷰)
2.8
2.8
사용자 아바타
Hi ! Please inbox the requirement. I will go through requirement and will decided amount and required timeline to float final drawings. I guarantee that shared files will not be disclose to any one. Skills: Mechanical Engineering, CAD, SOLIDWORKS-2019. Bid quote depends on project work, we will discuss it once the project requirement shared. Sincerely, Divya Patel
$140 USD 7일에
5.0 (5 건의 리뷰)
2.7
2.7
사용자 아바타
Hello, This looks simple enough, I'm new to this platform but i have a couple of years of experience with stress analysis, design optimization etc. Along with the part file i can also create a complete analysis report as well. Thanks & Regards
$110 USD 5일에
0.0 (0 건의 리뷰)
0.0
0.0
사용자 아바타
Hello How are you? I am Geet Deokate, I am a Mechanical Design Engineer with Masters in Mechanical Design Engineering. I have experience in working on softwares like CATIA V5, Solidworks and Ansys. I will be using Ansys 20 for the analysis, and I am having solidworks 20 for redesigning of component, if necessary. I would like to know the details about the component boundary condition and the results you are expecting. You can message me so that we could discuss further. Thank you
$75 USD 7일에
0.0 (0 건의 리뷰)
0.0
0.0
사용자 아바타
Hi Good Morning from India. I am a Mechanical Design Engineer. I would like to help you in this project. I am proficient in CAD softwares like Solid Works, Auto CAD, Ansys. Please message me so that we can discuss more. Waiting for your reply. Thank You.
$100 USD 3일에
0.0 (0 건의 리뷰)
0.0
0.0
사용자 아바타
Hi. I have a experience in CAE simulations for around 6 Years. I completed my masters in CAE itself and give you guaranteed perfect results with experience from around 5000+ simulations performed and Validated with practical results also. We will use your solidworks CAD data as a input and Hypermesh as a pre processor. Static solver optistruct or Nastran whatever you request to use (Optistruct we Propose). Report and results we discuss on webex.
$111 USD 2일에
0.0 (0 건의 리뷰)
0.0
0.0
사용자 아바타
Working in design field and having knowledge on manufacturing concepts. Looking forward to work in designing field. Ready to learn new things in the mechanical engineering field. Willing to go out of my comfort zone to get the best results. Develop robust designs for new, special, or existing products that can be produced economically and according to established project timelines
$140 USD 7일에
0.0 (0 건의 리뷰)
0.0
0.0
사용자 아바타
I designed so much parts related about oil $ gas for multinational Co., I have experiences for CAD models such as ( Solidworks, Inventor, Auto Cad, ..etc.).
$30 USD 1일에
0.0 (0 건의 리뷰)
0.0
0.0

고객에 대한 정보

국기 (MEXICO)
Guadalupe, Mexico
1.0
1
결제 수단 확인
3월 5, 2021부터 회원입니다

고객 확인

감사합니다! 무료 크레딧을 신청할 수 있는 링크를 이메일로 보내드렸습니다.
이메일을 보내는 동안 문제가 발생했습니다. 다시 시도해 주세요.
등록 사용자 전체 등록 건수(일자리)
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
미리 보기 화면을 준비 중...
위치 정보 관련 접근권이 허용되었습니다.
고객님의 로그인 세션이 만료되어, 자동으로 로그아웃 처리가 되었습니다. 다시 로그인하여 주십시오.