I need a Solidworks Designer

$10-30 USD

진행 중

게시됨

거의 2년 전

$10-30 USD

제출할때 지불됩니다

dimensions supplied are only for building the part; they do not infer functional relationships between features. Create a detail drawing of the SHIFTER BLOCK on B-Size Format (11x17 landscape format). Use the views that you feel would be necessary to dimension the part. Include a pictorial view. Do not display TANGENT EDGES on the orthographic views. Make a new layer for dimensions and centerlines with a color of your choosing. Add center marks and center lines as necessary. The ¼-28 threaded hole should have a thread depth of .50 and a tap drill depth of .61. Use a complete thread callout in your drawing. Size hole A to mate with a ∅. 3152 ± .0004 shaft with a maximum interference of -.0002 and maximum clearance of .+.0005 Specify the following geometric tolerances: • The bottom of the part is Datum A and is flat to .001 • The back of the part is Datum B and is perpendicular to the bottom to .002. • The right side of the part is Datum C and is parallel to the left. • The 60-degree angled surface requires an angularity tolerance of .007 to datum A. • Add the parallelism tolerance noted on the drawing.

Solidworks

CAD/CAM

Mechanical Engineering

프로젝트 ID: 34285950

프로젝트 정보

22 제안서

원격근무 프로젝트

활동 중 2년 전

돈을 좀 벌 생각이십니까?

이메일 주소

프리랜서 입찰의 이점

예산 및 기간 설정

작업 결과에 대한 급여 수급

제안의 개요를 자세히 쓰세요

무료로 프로젝트에 신청하고 입찰할 수 있습니다

22 이 프로젝트에 프리랜서들의 평균 입찰은 $32 USD입니다.

@sajjadtaghvaeifr

Hi, I hope you are doing fine. I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I have a lot of experience in automotive, aerospace, biotechnology, computers, electronics, microelectromechanical systems, energy conversion, robotics and automation, and manufacturing. I am also expert in mechanical engineering softwares including Ansys, Fluent, Comsol, CATIA, Solidworks, Abaqus and Inventor. I'm interested in your project. Please send me a message so that we can discuss more. Best regards.

$250 USD 7일에

4.8

(36 건의 리뷰)

6.7

@NguyenTran1010

Hi, I can do this job with appropriate budget accurately and quickly. Once we discuss the details, I will start immediately. Thanks.

$20 USD 1일에

4.9

(37 건의 리뷰)

5.9

@charlemagne9

Hi, I can create SolidWorks model of the attached image. Please contact me to discuss further details about this project. Thank you for your consideration. Best regards, Bryan

$30 USD 1일에

4.8

(136 건의 리뷰)

6.1

@yaninayukhymenko

Hi, There. Very glad to place bid on your project. I have read your project descriptions carefully. As I'm Solidworks(2021&2022), Fusion 360 expert, I have many experience with 3d modeling, product design and render for 3D PRINTING and MANUFACTURING purpose. If you are hire me, your project will be complete very quickly with better quality. Thanks for your review. Regards.

$30 USD 1일에

4.8

(24 건의 리뷰)

5.5

@AndreyAgeenko

***TURN YOUR IDEA INTO REALITY*** Hello. I read the job description carefully. I can turn your idea into 2d drawing so that you can go further with your idea. I have been designing engineering projects with Solid works, auto cad, inventor, freecad, 3Ds max, NX, ANSYS, Deform very hard since 10 years ago. I have worked on similar projects to what you are looking for, and I am confident I can exceed your expectations. I will respect and implement your needs from day one, so that you will be satisfied with the delivered work. I will provide very good after-sales service for this project, you can always count on me after the job is officially finished. A short chat-check won't cost you but can bring us together to success. Kind regards Andrey

$30 USD 1일에

4.9

(26 건의 리뷰)

5.1

@crashcoders

I am a professional Mechanical designer focused on 3D modeling, Simulation and Stress analysis. I have some good skills in mechanical design with CAD software (SolidWorks, FUSION 369, ANSYS & ABAQUS). Have done many projects of Designing. I read your project and sure I can handle your project. Your project will be delivered on time with high standard Assistance will be provided with number of clarifications until client satisfaction I will provide assistance even after the payment. And will maintain data (content) security. let's talk! We'll start by going over the details of your project.

$15 USD 1일에

5.0

(22 건의 리뷰)

4.4

@CHIRAG1190

Hey, I can do this easily. I am Mechanical engineer having professional experience in Design engineering and CAD modelling (Solidworks) for more than 9 years. Let's get connect on Chat to discuss project more in detail. Thanks.

$10 USD 1일에

5.0

(17 건의 리뷰)

4.0

@zahid49ch

Hello, Dear Client, I am a mechanical design engineer I have read your project description and found relevant to my skills and expertise. I have skills in statics,dynamics,mechanics of machines, mechanics of materials I can perform CFD,CFX,ANSYS,FLUENT,SOLIDWORKS, and SIMULATIONS. If you are intrested, Please contact me

$20 USD 7일에

4.6

(32 건의 리뷰)

4.3

@EdwingVivas

Dear Misters, I introduce myself as a mechanical engineer with diverse experience in the development of metal products, as you can see in my profile portfolio. I have reviewed the attached document, and I am able to carry out the request. If I am of your interest, we will gladly keep the details, objectives, time and value of the project, to adjust my offer to a point of mutual agreement. Thank you for reading my offer.

$35 USD 5일에

5.0

(4 건의 리뷰)

3.8

@pra009anu

Hi there I am an experienced mechanical engineer and expert in solidworks & Solidcam with experience in industrial automation of more than 7 years. I have designed, worked and installed various industrial machine and I have in-depth experience in mechanism. I have worked on various automobile plants of M&M, Sonalika tractors, Maruti KTL etc and various types of VMC and CNC. I have clear understanding of CAD over HTML. I can very easily complete it with in 1 day. You may open chat to discuss about it and I may send some sample works. Thanks Regards Anupam

$20 USD 1일에

5.0

(11 건의 리뷰)

3.6

@ravikr110

Hello, I have read the details you give in your post I am a mechanical engineer Certified in using Solidworks and a mechanical design Expert. I armed with more than 7 years of experience in mechanical design using Solidworks and Catia V5. I am also a Design For Manufacturing specialist and rendering specialist. Please text me on chat so I can share with you examples of performed projects. I guarantee to deliver excellent quality results within the deadline if you hire me. We can discuss more details over chat

$20 USD 7일에

5.0

(2 건의 리뷰)

1.5

@hesamnajafi8841

Hello to do your project it is important to know about the different functions of AUTOCAD because the more we use its facility the better the plan implies the features to its reader and about the shape you need it is important to insert the center and radius according to the source. beside the mentioned factors an ambidextrous mechanical engineer knowing about the standards of drawing should do it. I have the experience in both academic and industrial positions and it takes 1 day to do it and modify it as you wish. THANKS FOR YOUR GOOD PROJECT

$20 USD 7일에

4.4

(1 건의 리뷰)

0.9

@AFarukk1

I use Solidworks and NX for modelling and can provide you static structural, harmonic response analysis resulsts ,and cfd fluid analysis results as well. I'm a former Rocket competitor and rover competitor during these competitions I had the chance to work with both metals and composites ,desing phase and manufacturing of these materials.

$24 USD 1일에

0.0

(0 건의 리뷰)

0.0

@ttahiroglu78

15 yıllık tecrübem ile Autodesk Inventor de çizeceğim ve istediğiniz uzantıda göndereceğim. Ölçüler konusunda gerekli bilgiler netleştikten sonra çizime hemen başlayacağım ve hemen göndereceğim.

$20 USD 1일에

0.0

(0 건의 리뷰)

0.0

@Hungnongdan

I have many experience in solidworks drawing, I can give you the professional and exact drawing. with lowest price, because this time I need money.

$15 USD 3일에

0.0

(0 건의 리뷰)

0.0

@moustafaalnhar

Hi I'm Moustafa, I'll make it short and provide clear concise notes. I am a BSc Mechanical Engineer with 2 years of experience. I’ve worked with Mechanical Applied and Sheet Matel Using SolidWorks. I can help you with high-quality work in a short time. You can see an example of one of those projects in my portfolio Thanks! Moustafa

$20 USD 1일에

0.0

(0 건의 리뷰)

0.0

@harishtaj

Dear, Being a Mechanical Graduate Having more than 14 years of experience in AEROSPACE DOMAIN and willing to work with you and have experience Civil & Electrical field. Hope you will accept our request.

$20 USD 7일에