Advanced thermofluids case study for Internal combustion engine-steam turbine combined cycle power plant to find out the net power output from the steam turbine by recovering waste heat, the combined cycle power output (ICE and steam turbine), efficiency

$30-250 AUD

종료됨

게시됨

7개월 전

$30-250 AUD

제출할때 지불됩니다

In a combined cycle power plant, hot exhaust gas from an internal combustion engine is used to drive a steam turbine for electricity generation. The electrical output of the internal combustion engine is 1000 kW and the fuel consumption is 270 L/h. The density and the calorific value of the fuel are 875 kg/m3 and 44000 kJ/kg, respectively. Hot exhaust gases from the engine at 450 °C and 150 kPa enter the exhaust gas boiler at a rate of 5.5 kg/s and leaves at 120 °C to the atmosphere. The boiler efficiency is to be taken as 95%. The exhaust gas boiler is a heat exchanger with an overall heat transfer co-efficient of 1780 W/m2.K. The steam generated from the exhaust gas boiler enters a steam turbine at 350 °C and 4 MPa and leaves at 20 kPa with a moisture content of 5%. The steam leaves the condenser at saturated liquid. The mass flow rate of the steam is 0.75 kg/s. Assuming an isentropic efficiency for the pump of the Rankine cycle is 0.85%. The inlet water temperature to the condenser is 25 °C and the exit temperature of the water is 65 °C. Use constant specific heat properties. Specific heat of water is 4.18 kJ/kg.K. Air properties can be used for exhaust gases if needed. Kinetic and potential energy and exergy are negligible. The dead state properties are taken as 25 °C and 101 kPa. Determine: (i) the net power output from the steam turbine by recovering waste heat (units: kW), [Marks= 15%] (ii) the combined cycle power output (ICE and steam turbine) (units: kW), [Marks= 5%] (iii) Overall efficiency (units: %), [Marks= 5%] (iv) the exergy of the exhaust gas entering the boiler (units: kW), [Marks= 5%] (v) the exergy output of the exhaust gas leaving to the boiler (units: kW), [Marks= 5%] (vi) the exergy destruction in the exhaust gas boiler (units: kW) [Marks= 15%] (vii) the exergy input to the turbine (units: kW) [Marks= 5%] (viii) the exergy destruction in the turbine (units: kW) [Marks= 15%] (ix) the exergy destruction in the condenser (units: kW) [Marks= 15%] (x) the log mean temperature difference (units: °C) and the heat transfer area (units: m2) of the exhaust gas boiler [Marks= 7.5 +7.5%]

Electrical Engineering

Mechanical Engineering

Engineering

Electronics

Physics

프로젝트 ID: 37288043

프로젝트 정보

25 제안서

원격근무 프로젝트

활동 중 6개월 전

돈을 좀 벌 생각이십니까?

이메일 주소

프리랜서 입찰의 이점

예산 및 기간 설정

작업 결과에 대한 급여 수급

제안의 개요를 자세히 쓰세요

무료로 프로젝트에 신청하고 입찰할 수 있습니다

25 이 프로젝트에 프리랜서들의 평균 입찰은 $146 AUD입니다.

@megiengineers7

Hi, We went through your project description and it seems like our team is a great fit for this job. We are an expert team which have many years of experience on Engineering, Electronics, Mechanical Engineering, Electrical Engineering, Physics Lets connect in chat so that We discuss further. Thank You

$140 AUD 7일에

4.9

(71 건의 리뷰)

6.2

@farizaneeq12

Hello I am thrilled to have come across your project on conducting an advanced thermofluids case study focused on an Internal Combustion Engine (ICE) and Steam Turbine Combined Cycle Power Plant. With my background and expertise in THERMAL FLUIDS, HEAT TRANSFER, and INTERNAL COMBUSTION ENGINES, I am confident in delivering a high-quality, insightful, and data-driven case study that will meet your project’s objectives. I will provide all the relevant calculations required for the project, and will ensure that all the details are incluced in the report. I can show some of my past samples on similar topics as well. I can guarantee high-quality results that will exceed your wildest expectations. I commit myself to ensure timely delivery and offer the best services to make your documents outstanding. I will be looking for a positive response from you Regards Fariz Aneeq

$120 AUD 3일에

4.9

(66 건의 리뷰)

6.2

@engrhassanwali

Hello, my name is Hassan and I am a freelancer specializing in engineering, electronics, and other technical fields. I understand that you are seeking a partner who can provide expert assistance with a project regarding advanced thermofluids case study for internal combustion engine-steam turbine combined cycle power plant. With over 12 years of experience in the field of electrical engineering, electronics, mechanical engineering, physics and software development, I am confident that I can deliver exceptional results. My extensive experience in this field enables me to provide solutions to complex problems that meet or exceed client expectations. Additionally, I possess strong software skills such as VS Code, MATLAB/SIMULINK, Python and LATEX that enable me to deliver high quality solutions efficiently. I approach each project with professionalism, attention to detail and a commitment to deadlines. If you are seeking a highly skilled and reliable freelancer to tackle your technical challenges then look no further. I would be delighted to discuss your project requirements and work together to achieve outstanding results.

$250 AUD 7일에

4.9

(29 건의 리뷰)

5.9

@saleiz2019

Hello there Thank you for the detail. you can contact me on the chat so that I can start the calculation right away. I have done this in my thermodynamics course. Kind regards Saleamlak A.

$140 AUD 5일에

5.0

(30 건의 리뷰)

5.9

@hayat38402

We are a team of Expert Mechanical design Engineers, We have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas: • Manufacturing design • Product design • CAD/CAM • Matlab/Simulink • Simulation like CFD, FEA, structural analysis • Designing tools like COMSOL, SolidWorks, ABAQUS, CATIA, ANSYS, 3DMax We have good command over REPORT WRITING, We can show you many samples of our previous reports. We can discuss further details in the message box.

$250 AUD 7일에

4.6

(62 건의 리뷰)

6.1

@vronald183

Hi. I'm a chemical engineer and I'm an expert in thermodynamics. I read the job description and I can do the job. If you're interested in my services let me know. Kind regards.

$200 AUD 3일에

5.0

(19 건의 리뷰)

5.1

@fayyazs789

Hi there

$190 AUD 5일에

4.5

(5 건의 리뷰)

4.4

@dohuutiepuct

Hi. Thanks for your posting. I have just read your proposal and I am sure I can complete the project on time. I am a CFD expert who has 15 years of experiences in ANSYS FLUENT CFD. Please contact me to discuss about the project in more details. Waiting for your contact now... Thanks. Best Regards.

$100 AUD 2일에

5.0

(5 건의 리뷰)

3.9

@umern2waz

Hi! Greetings! i have read you project description. i did a same problem just oneday ago. and i am 100% sure i can do it and you will get high grade as i did before. trust me you will get quality work with in time limit. surely you will never regret. just knock me i will show you the solution as prove. let chat to discuss. Kindly contact me to discuss this further

$60 AUD 1일에

5.0

(13 건의 리뷰)

4.1

@mohjib092

Yo There, Certified engineer As i read the project description and understand the flow of work I can provide you quality work on time will finish in next in very short time Please come to the chat box so we can easily discuss in details Thank you

$300 AUD 1일에

5.0

(2 건의 리뷰)

3.5

@Samaji206

Hello I understand your request that you’re demanding Advanced thermofluids case study for Internal combustion engine-steam turbine combined cycle power plant to find out the net power output from the steam turbine by recovering waste heat, the combined cycle power output (ICE and steam turbine), efficiency As a Professional Geeks I can avail creative, proactive and high-tech solutions to your development needs. I have excellent experience in Metatrader (4 And 5),Ninjatrader (7 And 8),Indicators & Trading Robots Development,Tradingview (Pinescript & Strategy),Python Trading Api,Machine Learning,,Python,HTML, Javascript, PHP,CSS, Laravel,Java,Joomla,Angular.js,MySQL, Node.js, React.js,Wordpress,linux Ruby on Rails, Database, Objective-C and Swift,C, C#, C++, Qt, Linux and raspberry. My Engineering skill are unimaginable with lot of success in engineering task My page is clear about my professionalism with awarded task Don't hesitate to contact me to create awesome products! Thanks

$30 AUD 1일에

4.8

(5 건의 리뷰)

3.4

@RehmanAshraf107f

Hello Nice to see you. I'm here to offer my services in advance thermo fluid. I understand that you need someone to solve the complete questions for you, and I think would be the best fit for this project. With my experience in problem solving and background in electronics, physics and mathematics, I am confident that I can provide you with the best solutions possible for your needs. Please reach out to me directly for further discussion Sincerely

$30 AUD 1일에

5.0

(8 건의 리뷰)

3.4

@ahmedmubarik

Hello there! My name is Ahmed, and I am a professional 3D expert and product engineer with extensive experience in mechanical design, electronics, engineering, 2D/3D technical drawings/drafting and architecture/interior/exterior design and rendering. I understand that you are looking for someone to help with an advanced thermofluids case study for an internal combustion engine-steam turbine combined cycle power plant to find out the net power output from the steam turbine by recovering waste heat. I believe I am the perfect person for the task due to my extensive knowledge in thermofluids design, electronics and mechanical engineering. With my help, you are sure to achieve your goal of finding out the net power output from the steam turbine by recovering waste heat more efficiently than ever before. Plus I offer a wide range of services including mechanical/concept/product design/CNC/3D printing as well as creative 3D modeling/texturing/rendering/animation. Plus my services include mechanical design/analysis/simulation 2D/3D technical drawings/drafting architecture/interior design and rendering. Best regards.

$150 AUD 7일에

4.6

(3 건의 리뷰)

3.4

@dewruwani

Dear Hiring Manager, I am excited to express my interest in the freelancer position in the field of mechanical engineering. With over 12 years of experience in this industry, I have developed a strong foundation in various aspects of mechanical engineering, making me well-suited for this job. Throughout my career, I have gained expertise in areas such as design, analysis, and problem-solving within the mechanical engineering domain. I have successfully managed and contributed to a wide range of projects, from concept development to implementation, and have a proven track record of delivering high-quality results on time and within budget. I am confident that my extensive experience and skills make me an ideal candidate for this role. I am eager to bring my knowledge and expertise to your team, contributing to your organization's success and goals in the field of mechanical engineering. I would welcome the opportunity to discuss how I can contribute to your projects and be a valuable asset to your team. Thank you for considering my application. Sincerely, Dewruwani

$80 AUD 3일에

5.0

(6 건의 리뷰)

3.3

@prdraco

Feel free to contact me for Advanced thermofluids case study for Internal combustion engine-steam turbine combined cycle power plant .shoot me message to discuss further more details .i provide the comments,images,videos,demos and live sessions in order to help the clients. Make payment only after the work is done. Thank you

$200 AUD 3일에

5.0

(1 건의 리뷰)

2.3

@mesajjad1929

Hello there! My name is Sajjad, and I am a professional nuclear engineer/electrical/mechanical/aerospace expert with extensive experience in programming and coding analysis for Neutronics, Thermal Hydraulics, Heat Exchangers, Coupling between fluid flow and Heat transfer using COMSOL Multiphysics. I have published several research papers in the past which you can find here As you can see from my profile, I have extensive experience in engineering and physics. From my portfolio you can see that I have done a lot in the field of aerospace and mechanical engineering. This makes me an ideal candidate for your advanced thermofluids case study - specifically looking to find out the net power output from the steam turbine by recovering waste heat. I believe I am the best fit for this project due to my expertise in thermofluids which allows me to accurately simulate the system at high speeds while keeping accurate temperatures throughout the system. My skillset also includes CFD, FEA, CAD and other similar techniques which would be useful in analyzing the system.

$400 AUD 7일에

5.0

(1 건의 리뷰)

1.7

@PhanVuTien

Hello. I hope you are doing well. I am an expert in CFD and I have 20 years of experiences in ANSYS(FLEUNT/CFX/POLYFLOW/FORTE) & COMSOL & ABAQUS & Matlab. I have handled Aerodynamics(tactic missiles, aircraft, torpedo and automobile), Pyrolysis, Chemical reaction, Combustion, ICE, Multiphase flows(Particulate/Granular flows, fluid-fluid multiphase flows), Heat Trnasfer Analysis and so on. I can provide you the perfect result on time. Please contact me so that we can discuss about the details of the project. Thank you for your time.

$100 AUD 2일에

0.0

(0 건의 리뷰)

0.0

@ghayasa727

I understand you are looking for someone to help you with your project and I am confident that I can do this. My skills include electrical engineering, electronics, engineering and mechanical engineering which makes me the best fit for this job. I have the necessary experience in thermofluids and advanced thermofluids which will ensure successful completion of your project. I understand that you are looking to determine the net power output from the steam turbine by recovering waste heat and the combined cycle power output (ICE and steam turbine). My experience in electrical engineering will be useful in designing efficient systems that can meet your requirements. Additionally my knowledge of thermofluids will be an asset in designing systems that can effectively capture waste heat from the steam turbine and other components of the combined cycle power plant. My final goal is to provide the best solution for your project so please feel free to contact me if you have any questions or would like more information about my skills or project. Thank you for considering me for this job!

$140 AUD 7일에

0.0

(0 건의 리뷰)

2.2

@Pavel7Khramtsov

Creative technical expert with extensive experience in experimental and theoretical research work in plasma physics, plasma aerodynamics, diagnostics of high-speed processes, diagnostics of fluid, gas and plasma flows by optical methods, methods of visualization. Author of 123 publications and 1 book. http://www.springer.com/engineering/mechanical+eng/book/978-3-540-25001-2.

$140 AUD 7일에

0.0

(0 건의 리뷰)

0.0

@mohyou0802

Experienced energy specialist with +14 years of experience in the government energy sector, proven expertise in energy project development, management and planning. Skilled in energy policy, proven track record in energy strategy planning, energy security, energy finance, sustainable energy, energy efficiency, contract negotiation, renewable energy projects, off-grid energy solutions, climate change, and energy transition, environment & social impact analysis, manage national and international stakeholders, Thermal power plants STG, CCGT. Moreover, served as an Energy Consultant for several international energy organizations, including the International Renewable Energy Agency (IRENA), the International Solar Alliance (ISA), and OnFrontiers (USA) experts’ platform. In this role, I provide expert advice on a variety of energy-related issues, such as renewable energy development, energy efficiency, energy policy, and energy outlook. I also work with these organizations to develop and implement programs and projects that promote sustainable energy solutions.

$200 AUD 7일에